Corten steel is a copper-chromium-nickel weathering steel. Repeated wet and dry exposure turns its surface into a dense, adherent rust film called patina, which seals the metal and slows further atmospheric corrosion without paint.
S355J2W+N Corten steel plates are European-standard weathering structural plates with a 355 MPa minimum yield strength, supplied in normalised condition. Conquest Steel & Alloys, a Mumbai-based stockist, supplier and exporter of weathering steel plates and products since 2008, supplies them as hot rolled plate. Engineers use them for bridges, buildings, facade cladding, containers and other exposed steelwork.
S355J2W+N is a high-strength low-alloy weathering steel defined in EN 10025-5. Each part of the name carries meaning:
Copper-chromium-nickel alloying lets the surface form a stable patina. The patina slows later corrosion, so the plate can often stay unpainted in suitable environments. Buyers use many names for this material. You will see S355J2W+N Plates, S355J2W+N Corten plates, Corten Steel S355J2W+N Plates and ASTM A588 Corten S355J2W+N Plate. They all point to weathering plate in this family. ASTM A588 Gr.A is the usual American cross-reference, and the grade also appears as S355J2W+N High-Strength Low-alloy Structural Steel Plates. Many buyers search for “corten steel s355j2w+n plates manufacturers in mumbai” or “corten steel s355j2w+n plate manufacturers in mumbai”. Conquest is a stockist and supplier, not a mill. We source plates from mills that follow international plate production guidelines, then stock, cut and dispatch them from our Mumbai-region yards.
S355J2W+N (W. Nr. 1.8965) is cross-referenced to older European designations and to ASTM A588 Gr.A. The table shows the usual s355j2w+n corten steel plates equivalent grades. Each is a reference only, because chemistry, toughness and strength limits differ between standards.
| Standard | Designation |
|---|---|
| W. Nr. | 1.8965 |
| DIN | WSt52.3 |
| EN | S355J2G1W |
| BS | Fe510D2KI |
| JIS | SMA570W |
| AFNOR | E36WB4 |
| USA | A588 Gr.A |
How this compares with other weathering grades:
Confirm the equivalent on the mill test certificate. Substituting a grade without engineering approval can invalidate a design basis.
S355J2W+N is a low-carbon steel with controlled copper, chromium and nickel. The table shows the typical corten steel s355j2w+n plates chemical composition. Heat analysis on the mill test certificate governs every order.
| Element | Content (%) |
|---|---|
| Carbon (C) | 0.16 max |
| Silicon (Si) | 0.50 max |
| Manganese (Mn) | 0.50 to 1.50 |
| Phosphorus (P) | 0.03 max |
| Sulphur (S) | 0.03 max |
| Chromium (Cr) | 0.40 to 0.80 |
| Zirconium (Zr) | 0.15 max |
| Nickel (Ni) | 0.65 max |
| Copper (Cu) | 0.25 to 0.55 |
| Molybdenum (Mo) | 0.03 max |
| Carbon equivalent (CEV) | 0.44 max |
Copper-chromium-nickel alloying drives the patina. The low carbon and carbon equivalent also keep the plate weldable with standard procedures and weathering-grade consumables.
Minimum yield strength is 355 MPa for plate up to 16 mm, and tensile strength runs 470 MPa to 630 MPa. These are the s355j2w+n weathering structural steel plates mechanical properties we quote.
| Thickness range | Min. yield strength (MPa) | Tensile strength (MPa) | Min. elongation, Lo = 5.65√S₀ |
|---|---|---|---|
| Up to 16 mm | 355 | 470 to 630 | 20% |
| Over 16 mm to 40 mm | 345 | 470 to 630 | 20% |
| Over 40 mm to 63 mm | 335 | 470 to 630 | 20% |
Strength steps down as thickness rises. The J2 designation adds a 27 J impact guarantee at −20°C, which suits cold climates and dynamic loads. Ask for the mill test certificate with each dispatch and compare the lot values with your design requirement.
Conquest supplies S355J2W+N as plate, sheet and cut-to-size blanks, and it sells related weathering products. Our team handles enquiries for:
We also stock Corten coil, flat bar, pipe, tube, angles, beams and channels. Cutting to size, planning and packing are available from our Kalamboli and Taloja yards.
Indicative s355j2w+n plates price in Mumbai runs roughly ₹50 to ₹75 per kg (₹50,000 to ₹75,000 per tonne). The table below acts as an s355j2w+n hr steel plates price list by product form. Every figure is indicative and depends on grade, thickness, quantity, processing and market rates. None is a fixed quote.
| Product form | Indicative range (₹ per kg) | Indicative range (₹ per tonne) |
|---|---|---|
| S355J2W+N plate | 50 to 75 | 50,000 to 75,000 |
| Corten steel plate (general) | 65 to 80 | 65,000 to 80,000 |
| Corten coil | 60 to 90 | 60,000 to 90,000 |
| Corten flat bar | 55 to 75 | 55,000 to 75,000 |
| Corten pipe | 55 to 75 | 55,000 to 75,000 |
| Corten tube | 60 to 75 | 60,000 to 75,000 |
The main advantage is a long outdoor life with strong low-temperature toughness. The patina replaces a paint system, and the J2 impact guarantee supports use in colder or dynamically loaded structures.
Know the limits. Weathering steel needs wet-dry cycles to form a stable patina. Continuous immersion, burial in wet soil, and heavy chloride or salt spray can prevent that. Check the exposure class with your engineer before specifying.
Common Applications
S355J2W+N plate is most common in bridges, buildings, containers and outdoor architecture. Typical uses include:
Match each use to its exposure. Marine splash zones and chloride-heavy sites need a design review first.
Conquest Steel & Alloys has supplied steel plates from Mumbai since 2008. It draws on 30 years of promoter and partner experience in steel sourcing, stocking and supply chain. Buyers know us as an S355J2W+N Corten Steel Plates Supplier, an s355j2w+n corten plate supplier and a Corten Steel Plates Supplier in India. We also serve as an S355J2W+N Corten Steel Plates Distributor and an A242M Corten Steel Hot Rolled Plates Dealer. Our stock network includes an S355J2W+N Steel Plates Stockist in Mumbai, India, an S355J2W+N Corten Steel Plates Stockist in Mumbai, and an S355J2W+N Corten Steel Plates Stockist in india. Sheet and cladding buyers use us as an S355J2W+N Corten Steel Sheets Stockist and an S355J2W+N Corten Steel Sheets Supplier in mumbai. For A242 Corten Plates Stockist and a588 corten steel s355j2w+n plates stockist in mumbai enquiries, our team confirms stock against your specification. Overseas buyers reach us as an S355J2W+N Weathering Structural Steel Plates Exporter and s355j2w+n weathering steel plates exporter. Local and regional projects rely on us as a corten steel s355j2w+n weather resistant plate supplier in mumbai india.
Our footprint grew step by step:
What this means for your order:
Our plan is to add a dedicated logistics team to cut delivery costs for customers.
Conquest supplies S355J2W+N Corten plate across India and to export markets.
All exports are subject to applicable trade rules.
S355J2 is a non-alloy structural steel under EN 10025-2 with 355 MPa minimum yield strength. The J2 suffix guarantees 27 J impact energy at −20°C. The W-suffix grade, S355J2W, adds copper and chromium for atmospheric corrosion resistance, so it is a weathering version of the same strength class.
For plain S355J2+N, the closest Indian grade is IS 2062 E350 (killed, impact-tested quality). For the weathering version S355J2W+N, buyers use IS 11587 weather resistant grades, IRSM 41-97 or ASTM A588 Gr.A, depending on the design code. Confirm on the mill test certificate.
S355JR and S355J2 share a 355 MPa minimum yield strength. The difference is toughness: JR guarantees 27 J impact energy at +20°C, while J2 guarantees 27 J at −20°C and requires fully killed steel. Choose J2 for cold climates, dynamic loads or thick welded sections. The W variants add weathering alloys.
S355J2W+N Corten steel plate gives engineers a proven route to durable, low-maintenance outdoor steelwork. Its copper-chromium-nickel alloying builds a stable patina, its 355 MPa yield strength supports lighter sections, and its J2 toughness guarantee suits colder climates. When the exposure suits weathering steel, the plate often lowers total cost of ownership by reducing paint, shutdowns and repairs.
Choosing the right supplier matters as much as choosing the right grade. Conquest Steel & Alloys has served steel buyers from Mumbai since 2008, backed by 30 years of promoter and partner experience in steel sourcing, stocking and supply chain. We stock plates at our Kalamboli and Taloja yards, cut to size on request, run ultrasonic testing in-house and arrange documentation for quality records.
Before you order, send us your drawing or cutting list, the required thickness, width and length, the quantity, and your delivery location. State whether you need the mill test certificate with the dispatch, and tell us which equivalent grade your design code accepts. We will confirm availability and share an indicative price, then convert it into a formal quote once the details are final.
Ready to move? Request a quote today. Call our Mumbai sales team on +91 22 23894572 (Monday to Saturday, 10 am to 6 pm) or email csa@csteel.in with your requirement. Our team will respond with stock status, lead time and pricing for S355J2W+N Corten steel plates. Whether you need one plate or a full project lot, we are ready to help.
| India Price : | Min- 68 INR Per Kg / Max- 90 INR Per Kg |
|---|---|
| USD Price : | Min- 0.78 USD Per Kg / Max- 1.03 USD Per Kg |
| Grade : | S355J2W+N |
| Carbon (C) : | ≤ 0.13% |
| Manganese (Mn) : | ≤ 0.60% - 1.35% |
| Silicon (Si) : | ≤ 0.25% - 0.75% |
| Phosphorus (P) : | ≤ 0.03% |
| Sulphur (S) : | ≤ 0.03% |
| Chromium (Cr) : | ≤ 0.40% - 0.65% |
| Nickel (Ni) : | ≤ 0.65% |
| Copper (Cu) : | ≤ 0.25% - 0.55% |