NM 400 is a quenched and tempered abrasion-resistant steel plate with a typical hardness of 360 to 440 HBW. It resists sliding wear from rock, ore and coal, and it stays tough enough to absorb impact. Conquest Steel & Alloys supplies NM 400 wear-resistant steel plates in India from Mumbai. We incorporated in 2008, and our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain. Buyers search for these plates under several names: NM 400 plate abrasion wear resistant steel plates, abrasion resistant NM 400 steel plates, NM 400 HR plates and NM 400 liner plates. All of them describe the same grade. This page covers what the plate is, how we process it, available sizes, chemistry, mechanical properties, price ranges and applications, so you can compare suppliers before you send an enquiry.
NM 400 plate is an abrasion-resistant steel plate built to withstand heavy wear in harsh industrial environments. The “NM” stands for wear-resistant steel in Chinese grade naming, and “400” refers to its nominal Brinell hardness. The alloy combines iron, carbon, manganese, chromium, nickel, molybdenum and boron. Mills typically deliver NM 400 wear-resistant steel plates at 360 to 440 HBW. This hardness protects equipment that handles rocks, minerals and other hard, abrasive material.
What makes NM 400 useful:
NM 400 resists abrasion, and Corten resists atmospheric rust. They are different steels for different problems.
Corten steel is a weathering steel whose copper-chromium-nickel alloying forms a stable, tightly bonded rust layer called a patina. That layer slows further corrosion in the open air. Buyers use Corten (specified under standards such as ASTM A588 or IS 11587) for facade cladding and outdoor structures because of its atmospheric corrosion resistance. Corten is not a wear resistant steel and offers no abrasion resistance. If your equipment fights abrasion, choose NM 400. If it fights outdoor rust, ask us about Corten.
Mills roll and heat-treat NM 400 plate. Conquest Steel & Alloys then stocks, cuts, tests, packs and dispatches it. The two stages are listed separately below.
At the mill:
At Conquest Steel & Alloys:
We supply NM 400 plates in sizes that match your drawing or cutting plan. The table shows the size range we quote. Confirm availability against current stock.
| Dimension | Range |
|---|---|
| Thickness | 1.2 mm to 300 mm |
| Width | 50 mm to 4,020 mm |
| Length | 50 mm to 18,000 mm |
| Production | Hot rolled (HR) |
| Supply condition | Quenched and tempered |
The chemical composition data in this page covers 3 mm to 130 mm thickness. Ask our team for the exact grade data for any thickness outside that range. Cutting to size reduces your waste. Send us your dimensions, and we cut full plates into liners, strips or blanks before dispatch.
NM 400 is the mid-hardness grade in the NM wear-plate family, and it suits most general abrasion duties. The sample specification table below summarises the plate we stock.
| Parameter | Specification |
|---|---|
| Item | NM 400 abrasion resistant plate |
| Grade | NM 400 |
| Standard | JIS G4051, GB 711, YB/T 107, ASTM |
| Thickness | 1.2 to 300 mm |
| Width | 50 to 4,020 mm |
| Length | 50 to 18,000 mm |
| Hardness | 360 to 440 HBW |
| Yield strength | 1,000 MPa min |
| Tensile strength | 1,250 MPa |
| Supply condition | Hot rolled, quenched and tempered |
How NM 400 compares with neighbouring grades (nominal hardness):
| Grade | Nominal hardness | Best fit |
|---|---|---|
| NM 360 | About 360 HBW | Lighter abrasion, more formability |
| NM 400 | About 400 HBW | General abrasion with moderate impact |
| NM 450 | About 450 HBW | Heavier abrasion |
| NM 500 | About 500 HBW | Severe abrasion |
Availability of grades other than NM 400
NM 400 adds more alloy as thickness increases, so thick plates harden through the full cross-section. All elements are maximum percentages. CEV and CET are typical values.
|
Thickness (mm) |
Chemical Composition & Values |
|---|---|
|
3 to 8 |
C: 0.15, Si: 0.7, Mn: 1.6, P: 0.025, S: 0.01, Cr: 0.3, Ni: 0.25, Mo: 0.25, B: 0.004, CEV: 0.33, CET: 0.23 |
|
8 to 20 |
C: 0.15, Si: 0.7, Mn: 1.6, P: 0.025, S: 0.01, Cr: 0.5, Ni: 0.25, Mo: 0.25, B: 0.004, CEV: 0.37, CET: 0.27 |
|
20 to 32 |
C: 0.18, Si: 0.7, Mn: 1.6, P: 0.025, S: 0.01, Cr: 1.0, Ni: 0.25, Mo: 0.25, B: 0.004, CEV: 0.48, CET: 0.29 |
|
32 to 45 |
C: 0.22, Si: 0.7, Mn: 1.6, P: 0.025, S: 0.01, Cr: 1.4, Ni: 0.5, Mo: 0.6, B: 0.004, CEV: 0.57, CET: 0.31 |
|
45 to 51 |
C: 0.22, Si: 0.7, Mn: 1.6, P: 0.025, S: 0.01, Cr: 1.4, Ni: 0.5, Mo: 0.6, B: 0.004, CEV: 0.57, CET: 0.38 |
|
51 to 80 |
C: 0.27, Si: 0.7, Mn: 1.6, P: 0.025, S: 0.01, Cr: 1.4, Ni: 1.0, Mo: 0.6, B: 0.004, CEV: 0.65, CET: 0.41 |
|
80 to 130 |
C: 0.32, Si: 0.7, Mn: 1.6, P: 0.025, S: 0.01, Cr: 1.4, Ni: 1.5, Mo: 0.6, B: 0.004, CEV: 0.73, CET: 0.48 |
Why carbon equivalent matters: CEV and CET tell your welders how much preheat the plate needs. Higher values raise the risk of cracking, so thick sections need stricter control of preheat, interpass temperature and heat input.
NM 400 delivers about 1,000 MPa minimum yield strength and 1,250 MPa tensile strength, with 45 J Charpy V impact energy at -40°C. These figures confirm that the plate pairs hardness with usable impact toughness.
| Property | Value |
|---|---|
| Yield strength (min) | 1,000 MPa |
| Tensile strength | 1,250 MPa |
| Elongation (min) | 10% |
| Charpy V impact (longitudinal) | 45 J at -40°C |
| Brinell hardness | 360 to 440 HBW |
We distribute NM 400 plate in several forms so you can match the product to your fabrication route.
NM 400 combines 360 to 440 HBW hardness, 1,000 MPa minimum yield strength and good weldability in a hot-rolled, quenched and tempered plate.
Key properties at a glance:
NM 400 plate typically costs ₹90 to ₹145 per kg in India, and price rises with thickness and falls with order size. Every figure below is indicative only. It depends on grade, thickness, quantity, cutting needs and current market rates. These figures are not fixed quotes.
| Product form | Thickness | Indicative (₹/kg) | Indicative (₹/tonne) |
|---|---|---|---|
| NM 400 plate | 3 to 8 mm | 95 to 125 | 95,000 to 1,25,000 |
| NM 400 plate | 8 to 20 mm | 90 to 115 | 90,000 to 1,15,000 |
| NM 400 plate | 20 to 40 mm | 90 to 115 | 90,000 to 1,15,000 |
| NM 400 plate | 40 to 80 mm | 100 to 130 | 1,00,000 to 1,30,000 |
| NM 400 plate | 80 to 130 mm | 110 to 145 | 1,10,000 to 1,45,000 |
NM 400 is a plate grade, so we list no coil, pipe or tube rows. Judge cost by total cost of ownership, not price per kg alone. A cheaper plate that wears out sooner costs more once you add downtime and replacement labour.
Industries use NM 400 wherever abrasive material slides, rolls or falls against steel. The plate cuts replacement frequency and downtime.
Conquest Steel & Alloys is a Mumbai-based stockist and supplier of NM 400 plates that works with manufacturers and mills following international plate production guidelines. Our sourcing and supply exercises are interconnected, which supports on-time delivery.
Our growth in facts:
We plan to add a logistics team to improve conveyance of goods and reduce costs for customers.
Trust signals you can verify:
Our network reaches customers across India and abroad. Our promoters and partners bring 30 years of steel sourcing, stocking and supply chain experience, and Conquest Steel & Alloys has built its customer network since 2008.
Italy, Ukraine, Lebanon, Australia, Ecuador, Oman, United Kingdom, Qatar, Egypt, Jordan, Nepal, United States, Iran, South Africa, Iraq, Bolivia, Mexico, Colombia, Israel, Yemen, Turkey, France, Gabon, Germany, South Korea, Venezuela, Hungary, Zimbabwe, Sri Lanka, Vietnam, Taiwan, China, Nigeria, Canada, India, Spain, Portugal, Chile, New Zealand, Sweden, Pakistan, Denmark, Philippines, Namibia, Kuwait, Malaysia, Trinidad & Tobago, Indonesia, Kenya, Bahrain, Mongolia, Norway, Lithuania, Costa Rica, Brazil, Bhutan, Kazakhstan, Ghana, Greece, Estonia, Switzerland, Tunisia, Poland, Peru, Singapore, Hong Kong, Gambia, Bangladesh, Algeria, Finland, Slovakia, Tibet, Belarus, Netherlands, Austria, Romania, Puerto Rico, Azerbaijan, Macau, Ireland, Serbia, Morocco, Russia, Japan, Saudi Arabia, Czech Republic, United Arab Emirates, Thailand, Libya, Argentina, Afghanistan, Angola, Bulgaria, Belgium and Croatia.
We supply our NM 400 steel plate to these cities
Jakarta, Ludhiana, Ernakulam, Madrid, Manama, Perth, Kuala Lumpur, Gurgaon, Courbevoie, Jamshedpur, Nagpur, Singapore, Colombo, Ankara, Kanpur, Hyderabad, Coimbatore, New Delhi, Seoul, Chandigarh, Jaipur, Chiyoda, Pune, Bengaluru, Ahmedabad, Bhopal, Ho Chi Minh City, Melbourne, London, Santiago, Algiers, Rajkot, Lahore, Petaling Jaya, Chennai, Geoje-si, Navi Mumbai, Haryana, New York, Ahvaz, Atyrau, Doha, Brisbane, Calgary, Moscow, Sydney, Hong Kong, Edmonton, Mumbai, Montreal, Pimpri-Chinchwad, Bangkok, Al Jubail, Busan, Ranchi, Surat, Muscat, Vadodara, Nashik, Howrah, Kuwait City, Port-of-Spain, Bogota, Secunderabad, Indore, Lagos, Thane, Vung Tau, Kolkata, Noida, Riyadh, Ulsan, Mexico City, Houston, Hanoi, Thiruvananthapuram, Jeddah, Granada, Toronto, Dubai, Sharjah, Milan, Cairo, Karachi, Caracas, Abu Dhabi, Rio de Janeiro, La Victoria, Gimhae-si, Visakhapatnam, Dallas, Dammam, Aberdeen, Baroda, Tehran, Los Angeles, Istanbul, Faridabad and Al Khobar.
What is NM 400 steel plate?
NM 400 is a quenched and tempered abrasion-resistant steel plate with a typical hardness of 360 to 440 HBW. It resists sliding wear from rock, ore, coal and sand. Mining, cement and construction equipment makers use it for liners, buckets and truck bodies because it combines hardness with useful toughness.
Is Corten steel wear resistant?
No. Corten is a weathering steel that forms a protective patina for atmospheric corrosion resistance. It does not have the hardness needed for abrasion resistance. For sliding wear from rock, ore or coal, choose an abrasion-resistant grade such as NM 400. Use Corten for facade cladding and outdoor structures.
What is the Brinell hardness of NM 400?
NM 400 plate typically measures 360 to 440 HBW, depending on thickness and the mill’s heat treatment. The grade name refers to a nominal hardness near 400 HBW. Always confirm the exact value on the mill test certificate before you place a critical order.
Can you weld and cut NM 400 plates?
Yes. NM 400 offers good weldability, but fabricators must control preheat, interpass temperature and heat input to protect hardness and avoid cracking. Conquest Steel & Alloys provides oxyfuel cutting at Kalamboli and plasma and oxyfuel cutting at Taloja, so you can order plates cut to size.
Which NM grade should I choose?
Choose NM 400 for general abrasion with moderate impact. NM 360 suits lighter wear and more forming, while NM 450 and NM 500 suit heavier abrasion. Send your application details to Conquest Steel & Alloys, and our team will help you match the grade to your duty.
What testing does Conquest Steel & Alloys perform?
Our in-house quality team performs ultrasonic testing to check the internal soundness of plates. We do not perform destructive testing in-house. We arrange documentation for quality records, and you can ask for the mill test certificate with your enquiry.
How do I get an NM 400 plate quote in India?
Send your thickness, width, length, quantity, delivery location and required documents to Conquest Steel & Alloys in Mumbai. The team checks current stock and market rates, then shares a written quote. The indicative prices on this page are not fixed quotes.
NM 400 wear-resistant steel plates give your equipment a practical defence against sliding abrasion. With 360 to 440 HBW hardness, a quenched and tempered structure and good weldability, the grade suits chutes, hoppers, crusher liners, conveyor systems and earth-moving equipment. It outlasts mild steel in abrasive duty, and it lowers total cost of ownership once you count downtime and replacement labour, not only price per kilogram. Conquest Steel & Alloys has supplied steel plates from Mumbai since 2008. Our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain. We source from manufacturers and mills that follow international plate production guidelines, hold stock in Kalamboli and Taloja, and cut plates to size with oxyfuel and plasma facilities. Our in-house quality team performs ultrasonic testing, and we arrange documentation for quality records. Choose the grade that fits your duty. NM 400 suits general abrasion with moderate impact. If your application involves heavy impact or extreme abrasion, discuss NM 450 or NM 500 with our team before you order. If you need weather resistance instead of wear resistance, ask about Corten.
Ready to order? Send your thickness, width, length, quantity and delivery location. Our Mumbai team will confirm availability and share a written quote. Request a quote today, or call us for a technical consultation
| Parameter : | Detail |
|---|---|
| Item : | NM 400 Abrasion Resistant Plate |
| Thickness : | 1.2mm – 300mm |
| Length : | 50mm – 18000mm |
| Width : | 50mm – 4020mm |
| Production Process : | Hot-Rolled (HR) |
| Standard : | JIS G4051, GB711, YB/T107, ASTM |
| Hardness Variants : | Soft, Half Hard, Quarter Hard, Hard, Spring Hard |
| Heat Treatment : | Normalized (N), Quenched & Tempered (Q+T) |
| Applications : | Concrete industry, metallurgy, fan industry, coal industry, mining machinery, construction machinery |
Abrasion Resistant ROCKSTAR 400 Steel Plates are quenched and tempered wear..
Rockstar 400 Plates are premium wear resistant steel plates designed for he..
Abrasion Resistant ROCKSTAR 500 Steel Plates are quenched and tempered wear..