ABREX 400 is a quenched and tempered abrasion-resistant steel plate in the 400 HBW hardness class. It resists sliding wear from rock, ore and coal, and it keeps enough toughness to absorb impact.
Conquest Steel & Alloys supplies ABREX 400 plates in India from Mumbai. We incorporated in 2008, and our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain.
ABREX 400 plate is a hot-rolled, high-strength abrasion-resistant steel plate for equipment that faces constant wear. The “400” refers to its nominal Brinell hardness. Plates in this class typically measure 360 to 440 HBW.
Mills reach this hardness through quenching and tempering. Quenching cools the hot plate rapidly to harden it, and tempering reheats it to a lower temperature to restore toughness. The result is a plate that resists abrasion and stays tough under impact.
Why buyers choose ABREX 400:
ABREX 400 resists abrasion, and Corten resists atmospheric rust. They solve different problems, and buyers should never swap them.
Corten steel is a weathering steel whose copper-chromium-nickel alloying forms a tight, stable rust layer called a patina. That layer slows further corrosion in open air.
Buyers specify Corten (under standards such as ASTM A588 or IS 11587) for facade cladding and outdoor structures because of its atmospheric corrosion resistance. Corten is not a wear resistant steel and offers no meaningful abrasion resistance. If your equipment fights abrasion, choose ABREX 400. If it fights outdoor rust, ask us about Corten.
ABREX 400 plate typically costs ₹120 to ₹185 per kg in India, and price rises with thickness and falls with order size. Every figure below is indicative only. It depends on grade, thickness, quantity, cutting needs and current market rates. These figures are not fixed quotes.
| Product form | Thickness | Indicative (₹/kg) | Indicative (₹/tonne) |
|---|---|---|---|
| ABREX 400 plate | 6 to 8 mm | 125 to 165 | 1,25,000 to 1,65,000 |
| ABREX 400 plate | 8 to 20 mm | 120 to 155 | 1,20,000 to 1,55,000 |
| ABREX 400 plate | 20 to 40 mm | 125 to 160 | 1,25,000 to 1,60,000 |
| ABREX 400 plate | 40 to 100 mm | 135 to 185 | 1,35,000 to 1,85,000 |
ABREX 400 is a plate grade, so we list no coil, pipe or tube rows. Judge cost by total cost of ownership, not price per kg alone. A longer-lasting liner costs more per kilogram, but it cuts replacement frequency and downtime.
ABREX 400 limits carbon to 0.21% maximum and adds nickel, chromium, molybdenum and boron for hardenability. The table shows the maximum percentage of each element. Alloy levels vary with plate thickness, so confirm the exact analysis on the mill test certificate.
| Grade – Element | Value (%) |
|---|---|
| ABREX 400 – C | ≤0.21 |
| ABREX 400 – Si | ≤0.70 |
| ABREX 400 – Mn | ≤2.00 |
| ABREX 400 – P | ≤0.025 |
| ABREX 400 – S | [VERIFY WITH MTC] |
| ABREX 400 – Ni | ≤1.20 |
| ABREX 400 – Cr | ≤0.60 |
| ABREX 400 – Mo | ≤0.60 |
| ABREX 400 – B | ≤0.005 |
| ABREX 400 – PCM | ≤0.30 / ≤0.35 [VERIFY THICKNESS BANDS] |
Why PCM matters: PCM (parameter for cold cracking) tells your welders how much preheat the plate needs. A higher value raises the risk of cracking, so thicker sections need stricter control of preheat, interpass temperature and heat input.
ABREX 400 delivers about 1,000 MPa minimum yield strength and 1,250 MPa tensile strength, with 45 J Charpy V impact energy at -40°C. These figures show that the plate pairs hardness with usable impact toughness.
| Property | Value |
|---|---|
| Yield strength (min) | 1,000 MPa |
| Tensile strength | 1,250 MPa |
| Elongation (min) | 10% |
| Charpy V impact (longitudinal) | 45 J at -40°C |
| Hardness | About 400 HBW |
We distribute ABREX 400 in several forms and related names, so you can match your drawing or specification. Availability depends on stock [CONFIRM STOCK].
Industries use ABREX 400 wherever abrasive material slides, rolls or falls against steel. The plate cuts replacement frequency and downtime.
Choose ABREX 400 for general abrasion with moderate impact, and choose ABREX 500 for severe abrasion from sharp, hard material. ABREX 500 is harder, and ABREX 400 is tougher and easier to form.
| Factor | ABREX 400 | ABREX 500 |
|---|---|---|
| Nominal hardness | About 400 HBW | About 500 HBW |
| Typical impact energy | 45 J at -40°C | 37 J at -40°C |
| Wear life | Good in general abrasion | Longer in severe abrasion |
| Forming and cutting | Easier | Needs more care |
| Weld preheat | Lower | Higher, so plan carefully |
| Typical use | Chutes, hoppers, liners, truck bodies | Crusher liners, bucket edges, hammers |
Rule of thumb:
Send your application details, and our team will help you match the grade to your duty.
Conquest Steel & Alloys is a Mumbai-based stockist and supplier of ABREX 400 plates that works with manufacturers and mills following international plate production guidelines. Our sourcing and supply exercises are interconnected, which supports on-time delivery.
Our growth in facts:
We plan to add a logistics team to improve conveyance of goods and reduce costs for customers.
Trust signals you can verify:
Our network reaches customers across India and abroad. Our promoters and partners bring 30 years of steel sourcing, stocking and supply chain experience, and Conquest Steel & Alloys has built its customer network since 2008.
We supply our abrasion resistant 400 wear plates to these countries
Thailand, Chile, Ukraine, Germany, Poland, Macau, Belarus, Trinidad & Tobago, Vietnam, Yemen, Algeria, Oman, Mongolia, New Zealand, Libya, Lithuania, Zimbabwe, Denmark, Gambia, Mexico, Czech Republic, United Kingdom, Saudi Arabia, Venezuela, Australia, India, Austria, Switzerland, Bahrain, Jordan, Hungary, Argentina, Kuwait, Slovakia, Puerto Rico, China, Bhutan, Angola, Azerbaijan, Russia, Iran, Philippines, Sri Lanka, Bulgaria, Croatia, Norway, Canada, Iraq, Portugal, South Korea, Lebanon, Romania, Israel, Ecuador, Japan, Costa Rica, Tunisia, Netherlands, Morocco, Belgium, Taiwan, Gabon, Singapore, Qatar, Tibet, Serbia, Spain, Kazakhstan, Malaysia, Namibia, Ghana, Bangladesh, Peru, Greece, Hong Kong, Nepal, Pakistan, Sweden, Ireland, Egypt, Nigeria, Turkey, Bolivia, Italy, Kenya, Finland, Indonesia, Brazil, Afghanistan, Colombia, France, South Africa, United Arab Emirates, Estonia and United States.
We supply our abrasion resistant 400 steel plate to these cities
New York, Lagos, Pimpri-Chinchwad, Singapore, Muscat, Pune, Edmonton, La Victoria, Ernakulam, Manama, Mumbai, Aberdeen, Bogota, Nagpur, Dallas, Jaipur, Dubai, Noida, Calgary, Ahvaz, Houston, Melbourne, Chandigarh, Rajkot, Hyderabad, Chennai, Kolkata, Montreal, Vadodara, Milan, Toronto, Visakhapatnam, Abu Dhabi, Bhopal, Kanpur, Busan, Haryana, Rio de Janeiro, Hanoi, Ankara, Howrah, Dammam, Thane, Ahmedabad, Bangkok, Tehran, Gurgaon, Caracas, Cairo, Petaling Jaya, Faridabad, Coimbatore, Jakarta, Hong Kong, Ho Chi Minh City, Santiago, Doha, Nashik, Navi Mumbai, Moscow, Ludhiana, Madrid, Indore, London, Ranchi, Baroda, Ulsan, Chiyoda, Sydney, Surat, New Delhi, Riyadh, Secunderabad, Gimhae-si, Colombo, Kuwait City, Jeddah, Granada, Seoul, Kuala Lumpur, Sharjah, Port-of-Spain, Vung Tau, Karachi, Lahore, Thiruvananthapuram, Geoje-si, Istanbul, Mexico City, Al Jubail, Atyrau, Perth, Bengaluru, Courbevoie, Jamshedpur, Al Khobar, Los Angeles, Algiers and Brisbane.
ABREX 400 is a quenched and tempered abrasion-resistant steel plate in the 400 HBW hardness class. It resists sliding wear from rock, ore and coal while keeping enough toughness for impact. Mining, crushing and construction firms use it for liners, buckets and truck bodies.
Both names describe 400 HBW-class abrasion-resistant plate, but ABREX 400 is a mill brand name, while AR 400 is a generic term. Each mill sets its own chemistry and test limits, so check the mill test certificate when you need a specific brand or specification.
ABREX 400 has a nominal hardness of about 400 HBW, and the 400 class typically spans 360 to 440 HBW. Exact values depend on thickness and the mill’s heat treatment. Confirm the measured hardness on the mill test certificate before you order for critical duty.
ABREX 500 is harder, at about 500 HBW, so it lasts longer in severe abrasion from sharp, hard material. ABREX 400 offers more toughness, easier forming and lower preheat demands. Choose ABREX 400 for general abrasion with moderate impact, and ABREX 500 for the harshest wear.
Yes. ABREX 400 welds and cuts well when fabricators control preheat, interpass temperature and heat input to protect hardness and avoid cracking. Conquest Steel & Alloys offers oxyfuel cutting at Kalamboli and plasma and oxyfuel cutting at Taloja, so you can order plates cut to size.
No. Corten is a weathering steel that forms a protective patina for atmospheric corrosion resistance. It does not have the hardness needed for abrasion resistance. For sliding wear from rock, ore or coal, choose an abrasion-resistant grade such as ABREX 400. Use Corten for facade cladding and outdoor structures.
Send your thickness, width, length, quantity, delivery location and required documents to Conquest Steel & Alloys in Mumbai. The team checks current stock and market rates, then shares a written quote. The indicative prices on this page are not fixed quotes.
ABREX 400 plates give your equipment a practical defence against sliding abrasion. With a nominal hardness of about 400 HBW, a quenched and tempered structure and good weldability, the grade suits chutes, hoppers, stone crusher liner plates, conveyor systems and earth-moving equipment. It outlasts mild steel in abrasive duty, and it lowers total cost of ownership once you count downtime and replacement labour, not only price per kilogram. Conquest Steel & Alloys has supplied steel plates from Mumbai since 2008. Our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain. We source from manufacturers and mills that follow international plate production guidelines, hold stock in Kalamboli and Taloja, and cut plates to size with oxyfuel and plasma facilities. Our in-house quality team performs ultrasonic testing, and we arrange documentation for quality records. Choose the grade that fits your duty. ABREX 400 suits general abrasion with moderate impact. If your application involves severe abrasion from sharp, hard material, compare ABREX 500 with our team before you order. If you need weather resistance instead of wear resistance, ask about Corten. Ready to order? Send your thickness, width, length, quantity and delivery location. Our Mumbai team will confirm availability and share a written quote. Request a quote today, or call us for a technical consultation.
| Grade : | ABREX 400 |
|---|---|
| Hardness : | 370 – 430 |
| Thickness : | 4 mm to 100 mm |
| Width : | Up to 2500 mm |
| Length : | Up to 12000 mm |
| Weldability : | Excellent |
| Tensile Strength : | 1250 MPA |
| Yield Strength : | ≥ 1000 MPA |
Abrasion Resistant ROCKSTAR 400 Steel Plates are quenched and tempered wear..
Rockstar 400 Plates are premium wear resistant steel plates designed for he..
Abrasion Resistant ROCKSTAR 500 Steel Plates are quenched and tempered wear..