Shop 500 BHN Abrasion Wear Resistant Steel Plates at Best Price in Delhi — Conquest Steel & Alloys
Conquest Steel & Alloys manufactures and supplies 500 BHN abrasion wear resistant steel plates, quenched and tempered to a mill hardness of approximately 470–530 Brinell (BHN) for demanding, high-wear industrial environments. Built for mining, construction, and heavy material-handling equipment, these plates deliver significantly higher wear resistance than 400 BHN-class plate, extending component life in the most abrasive operating conditions. As a leading 500 BHN abrasion wear resistant steel plates manufacturer and 500 BHN abrasion wear resistant steel plates supplier, Conquest Steel & Alloys stocks a wide thickness range with pan-India dispatch and ISO9001:2000-certified quality control.
What Are 500 BHN Abrasion Wear Resistant Steel Plates?
500 BHN abrasion wear resistant steel plates are quenched and tempered steel plates with a surface hardness of roughly 470 to 530 on the Brinell hardness scale, engineered for severe abrasive wear from ore, rock, sand, and other coarse bulk materials. The "500 BHN" designation reflects the plate's high hardness rating, placing it among the toughest commonly used abrasion-resistant grades, ahead of 400 BHN plate in wear life but requiring more careful fabrication due to its higher hardness.
Where Are 500 BHN Abrasion Wear Resistant Steel Plates Used? (Applications)
500 BHN plates are installed wherever equipment surfaces face the most severe, continuous abrasive contact and long service life outweighs ease of fabrication. Common applications include:
- Mining machinery — crusher liners, chutes, and ore-handling equipment exposed to heavy rock and ore contact
- Construction machinery — bucket edges, dozer blades, and high-wear dump body liners
- Coal handling plants — bunkers, hoppers, and conveyor transfer points under continuous load
- Cement and concrete industry — mixer linings and material transfer chutes
- Quarrying and aggregate processing — screening decks, chutes, and crusher wear plates
- Heavy fabrication — custom wear liners for high-abrasion structural components
Why 500 BHN Abrasion Wear Resistant Steel Plates Are Important
500 BHN plates matter because they deliver substantially longer service life than lower-hardness grades in the most severe abrasive environments, directly reducing replacement frequency and downtime. Where 400 BHN plate may wear through in months under heavy rock or ore contact, 500 BHN's higher hardness resists gouging and surface wear for considerably longer, which lowers the total cost of ownership even though the plate itself carries a higher unit price — particularly valuable for high-throughput mining and quarrying operations where liner replacement means lost production time.
Features of 500 BHN Abrasion Wear Resistant Steel Plates
- High hardness of approximately 470–530 BHN, among the toughest commonly available abrasion-resistant grades
- Quenched and tempered (Q+T) heat treatment for consistent hardness through the plate thickness
- Retained toughness alongside high hardness, resisting cracking under heavy impact loads
- Charpy V-notch impact tested at low temperature, confirming reliable performance in cold and high-stress conditions
- Available in Hot-Rolled (HR) production for dimensional consistency and stable internal grain structure
- ISO9001:2000 certified manufacturing process for consistent quality control
- Wide thickness range covering both lining applications and heavy structural wear components
Benefits of 500 BHN Abrasion Wear Resistant Steel Plates
- Longer service life — significantly outlasts mild steel and lower-hardness wear grades under heavy abrasive contact
- Lower total cost of ownership — fewer replacements offset the higher per-plate cost over the equipment's operating life
- Reduced downtime — less frequent shutdowns for liner replacement in high-throughput mining and quarrying operations
- Reliable impact resistance — combined hardness and toughness prevent brittle cracking under mechanical shock
- Corrosion resistance, supporting durability in humid or wet operating environments
- Consistent quality assurance — every batch checked against defined hardness and chemical composition ranges
Types of 500 BHN Abrasion Wear Resistant Steel Plates
Conquest Steel & Alloys supplies 500 BHN plates across multiple product forms to match different application and sourcing needs:
| Material Designation | Best Suited For |
|---|---|
| AR 500 Plate | Standard high-abrasion structural components |
| 500 BHN Wear Resistant Plate | Crusher liners and heavy chute linings |
| 500 BHN Abrasion Resistant Steel Plate | Bucket edges and high-wear dump body liners |
| Quenched & Tempered 500 Grade Plate | Custom-fabricated severe-duty wear parts |
Core Specifications & Material Properties
500 BHN Plate Specification
| Parameter | Detail |
|---|---|
| Item | 500 BHN Abrasion Wear Resistant Steel Plate |
| Thickness | 4mm – 100mm |
| Length | Up to 12,000mm |
| Width | Up to 3,000mm |
| Hardness | 470 – 530 BHN |
| Certification | ISO9001:2000 |
| Production | Hot-Rolled (HR) |
| Applications | Mining machinery, construction machinery, coal industry, cement industry, quarrying and aggregate processing |
| Heat Treatment | Quenched and Tempered (Q+T) |
| Material Names | 500 BHN Plate, AR 500 Steel Plate, 500 BHN Abrasion Resistant Steel Plate, 500 BHN Wear Resistant Plate |
500 BHN Plates — Typical Chemical Composition
| Element | Typical Max % |
|---|---|
| Carbon (C) | 0.30 |
| Silicon (Si) | 0.70 |
| Manganese (Mn) | 1.60 |
| Phosphorus (P) | 0.025 |
| Sulfur (S) | 0.010 |
| Chromium (Cr) | 1.50 |
| Nickel (Ni) | 1.00 |
| Molybdenum (Mo) | 0.60 |
| Boron (B) | 0.004 |
This controlled chemical composition — with low sulfur and phosphorus content and added chromium, nickel, and molybdenum for hardenability — allows 500 BHN plates to achieve their high surface hardness while retaining sufficient toughness to resist impact cracking.
500 BHN Plates — Typical Mechanical Properties
| Grade | 500 BHN |
| Hardness (BHN) | 470 – 530 |
| Elongation (min %) | 10 |
| Charpy V Impact Test Temp | -40°C |
| Impact Direction | Longitudinal |
These mechanical properties confirm 500 BHN plates deliver high hardness alongside proven low-temperature toughness, resisting both severe abrasive wear and sudden impact fracture during service.
Note: The specifications above reflect standard industry ranges for 500 BHN-class abrasion-resistant plate. Share your project's exact grade standard (e.g., AS/NZS, EN 10025-6, or a specific mill certificate requirement) and we'll confirm precise batch specifications before quotation.
Why Choose Conquest Steel & Alloys as a Supplier for Abrasion Resistant Plates?
Conquest Steel & Alloys is a Mumbai-based manufacturer and supplier providing 500 BHN abrasion wear resistant steel plates to domestic and global clients across a range of standards, specifications, and cut-to-size configurations. Every plate is produced under ISO9001:2000-certified quality control and checked against defined hardness and chemical composition ranges before dispatch, giving buyers confidence in consistent wear performance batch after batch.
Buyers choose Conquest Steel & Alloys because we offer:
- Direct manufacturer pricing with no middleman markup
- Custom cutting and sizing across a wide thickness range
- Hot-Rolled production for dimensionally stable, consistent-grain plate
- Pan-India delivery network for fast dispatch to project and plant sites
- Technical support for grade selection based on your specific wear and impact conditions
- Transparent quotation process with clear specification sheets for every order
Contact Conquest Steel & Alloys for Abrasion Resistant Plates at Best Price in Delhi
In the most severe abrasive environments — heavy rock, ore, and continuous crusher contact — the wear life difference between a mid-hardness plate and a true high-hardness grade adds up fast in replacement frequency and downtime. 500 BHN abrasion wear resistant steel plates are built for exactly these conditions, delivering a mill hardness of roughly 470 to 530 BHN that significantly outlasts mild steel and lower-hardness grades under continuous abrasive contact.
Conquest Steel & Alloys manufactures 500 BHN plates under ISO9001:2000-certified quality control, stocked from 4mm to 100mm thickness in Hot-Rolled production, so buyers can source both lining sheets and heavy structural wear components engineered for severe-duty service. Every order ships with a clear specification sheet, and our pan-India delivery network keeps lead times short for project and plant sites across the country.
If liner replacement and downtime are eating into your mining, quarrying, or heavy construction operation's productivity, it's worth comparing your current material against 500 BHN plate's wear life. Get in touch with Conquest Steel & Alloys today to discuss your thickness, grade, and sizing requirements — our technical team will prepare a detailed quotation and specification sheet for your project.
Request a Quote for 500 BHN Abrasion Wear Resistant Steel Plates — Contact Conquest Steel & Alloys Today.
500 BHN Specification:
| India Price : | Min- 110 INR / Max- 130 INR |
|---|---|
| USD Price : | Min- 1.25 INR / Max- 1.48 INR |
| Grade : | 500 BHN |
| Hardness : | 480 – 550 BHN |
| Thickness : | 6mm – 100mm |
| Width : | Up to 2500mm |
| Length : | Up to 12000mm |
| Yield Strength : | ≥ 1300 MPA |
| Tensile Strength : | ≥ 1500 MPA |
| Standards : | EN 10051 / ASTM / IS equivalents |
