Abrasion Resistant Steel Plate 200 BHN: Specifications, Grades, Applications & Supplier in India

If your machinery, chutes or hoppers keep wearing out long before their time, Abrasion Resistant Steel Plate 200 BHN is one of the most practical and economical fixes on the market. It gives you real protection against sliding wear and moderate abrasion, yet it stays easy to cut, bend and weld in any workshop. At Conquest Steel & Alloys, we stock and supply 200 BHN plates from our Mumbai base to buyers across India and overseas.

This guide explains what a 200 BHN plate is, its technical data, the grades we offer, where it works best and how to order it. You can also view our live product page for Abrasion Resistant Steel Plate 200 BHN or our sister site's 200 BHN steel plates supplier & exporter page for more stock information.

What Is Abrasion Resistant Steel Plate 200 BHN?

Abrasion resistant steel plate 200 BHN is a hot rolled, wear resistant plate with a Brinell Hardness Number of about 200. It sits at the entry level of the wear plate family, so it is sometimes called a 200 BHN liner plate, 200 BHN wear plate or 200 Brinell hardness steel plate. Brands such as SAILHARD, JSP HARD and TISCRAL are all sold in this hardness range.

What Does 200 BHN Mean?

BHN stands for Brinell Hardness Number. It is measured by pressing a hard ball into the plate surface and checking the size of the dent. A rating of 200 BHN means the plate resists surface wear far better than ordinary mild steel, while remaining soft enough to be machined, gas cut and formed without special tooling.

Why Choose a 200 BHN Plate Over Mild Steel?

• Longer service life than plain carbon steel in sliding and light impact wear
• Excellent weldability, so repairs and fabrication are simple
• Lower cost than 400, 450 or 500 BHN plates
• Good ductility, so the plate can be bent and rolled for liners and bodies
• Wide thickness range, from thin sheet liners to heavy structural sections

Is 200 BHN the Right Hardness for You?

Choose 200 BHN when the job involves moderate abrasion, sliding contact or structural duty with some wear. For heavy impact or very abrasive rock and ore, a harder plate such as 400 BHN or 500 BHN is usually a better match. Our team can help you decide before you order.

Abrasion Resistant Steel Plate 200 BHN Specification

The table below lists the standard size range and technical data of our 200 BHN plates. Other sizes can be cut to your drawing.

Parameter	Details
Product	Abrasion Resistant Steel Plate 200 BHN
Grade	Abrasion Resistant 200 BHN Steel Plate
Hardness	Approx. 200 BHN (Brinell Hardness Number)
Thickness	3 mm to 100 mm
Width	1000 mm to 3000 mm
Length	Up to 12000 mm
Yield Strength	Approx. 250 – 350 MPa
Tensile Strength	Approx. 450 – 600 MPa
Weldability	Excellent
Standards	As per ASTM / EN specifications
Typical Uses	Structural parts, chutes, silos, machinery parts
Cut-to-Size	Available on request

200 BHN Plate Chemical Composition

Controlled chemistry gives the plate its balance of hardness, strength and weldability.

Element	C	Mn	S	P	Si
Content (%)	0.23 max	1.6 min	0.05 max	0.05 max	0.5 max

200 BHN Plate Mechanical Properties

Property	Value
Hardness	200 BHN (minimum)
Yield Strength	Approx. 250 – 350 MPa
Tensile Strength	Approx. 450 – 600 MPa
Weldability	Excellent
Formability	Good, suitable for bending and rolling

Tests We Carry Out for Quality Assurance

Before dispatch, our plates can be checked through macro and micro tests, hardness tests, toughness tests, destructive tests and PMI testing. Ask us for the test certificate that matches your order.

200 BHN Abrasion Resistant Plate Grades & Brands We Supply

We stock several well-known 200 BHN wear plate brands, so you can match the plate to your budget and project standard. Each name below links to its own product page.

Brand / Grade	Hardness	Best Suited For	Product Page
SAILHARD	~200 BHN	Liners, chutes, hoppers, general wear parts	SAILHARD plates
JSP HARD	~200 BHN	Structural wear parts, bodies, mining equipment	JSP HARD plates
TISCRAL	~200 BHN	Conveyors, dumper bodies, material handling	TISCRAL plates
UTTAMHARD / EVONITH HARD (LAS07)	~200 BHN	Liners, loaders, heavy machinery parts	UTTAMHARD plates
200 BHN Steel Plate	~200 BHN	Silos, structural duty, general abrasion	200 BHN plates

Related Wear Resistant Steel Plates

If your application needs more hardness than 200 BHN, explore our full wear resistant steel range, including ABREX, QUARD, ROCKSTAR and NM plates. For very high impact work, our manganese steel plates are also available.

Key Features & Benefits of 200 BHN Wear Resistant Steel Plate

Performance Advantages

• Abrasion resistance: the hardened surface slows down wear from sliding material such as sand, coal, grain and gravel.
• High yield strength: the plate carries load as well as resisting wear, so it works as a structural part too.
• Good weldability and ductility: it can be gas cut, bent, rolled and welded with common workshop methods.
• Wide temperature tolerance: it performs in both low and high working temperatures.
• Long, reliable service life: fewer liner replacements mean less downtime and lower maintenance cost.
• Easy to install: cut-to-size plates are fitted quickly on site.

Where Is 200 BHN Abrasion Resistant Steel Plate Used?

Industry	Typical Applications of 200 BHN Plate
Mining & Quarrying	Liner plates, chutes, hoppers, dump bodies
Cement & Construction	Silos, bins, hoppers, mixer parts
Material Handling	Conveyor belt plates, loaders, bucket parts
Automobile & Transport	Dumper and truck bodies, trailer floors
Power & Steel Plants	Coal handling chutes, ash handling, hoppers
Petrochemical & Chemical	Pumps, process equipment, wear guards
Heavy Engineering	Machinery parts, structural wear components
Agriculture & Food Processing	Grain silos, screw conveyors, feed hoppers

Real-World Example: Chutes and Hoppers

A material chute made from plain mild steel can show deep grooves far sooner than expected. Lining the same chute with a 200 BHN plate keeps the surface smooth for much longer and can be replaced section by section instead of rebuilding the whole structure.

200 BHN vs 400, 450 & 500 BHN Abrasion Resistant Plates

Hardness is not the only factor. Higher BHN plates resist wear better but are harder to cut, bend and weld, and they cost more. This table gives a quick comparison.

Feature	200 BHN	400 BHN	450 BHN	500 BHN
Approx. Hardness	~200 BHN	~400 BHN	~450 BHN	~500 BHN
Wear Resistance	Moderate	High	Very high	Extremely high
Weldability	Excellent	Good	Good, with care	Needs controlled procedure
Formability	Excellent	Good	Limited	Limited
Relative Cost	Lowest	Medium	Higher	Highest
Best For	Sliding wear, liners, structural duty	Mining, earthmoving, heavy wear	Severe abrasion, crushers	Extreme abrasion, impact zones

How to Choose the Right Abrasion Resistant Steel Plate

1. Check the wear type. Sliding or light abrasion suits 200 BHN, while heavy impact calls for a harder plate.
2. Look at the plate thickness. Thicker 200 BHN plates give a longer wear allowance at a modest price.
3. Consider fabrication needs. If the part must be bent or welded often, 200 BHN is the easiest to work.
4. Compare lifecycle cost. A cheaper plate that is replaced twice is dearer than a better-matched one.
5. Ask our team. Share your drawing or application and we will recommend the right grade.

Cutting, Welding & Fabrication Tips

200 BHN plate can be gas cut, plasma cut, drilled and welded using standard carbon steel practice, which is why it is popular with fabrication shops. Follow the filler metal and preheat advice of your welding procedure, and ask us for the mill test details of the batch you buy.

Why Buy Abrasion Resistant Steel Plate 200 BHN from Conquest Steel & Alloys?

Incorporated in 2008 and backed by over 30 years of experience in steel sourcing, stocking and supply chain, Conquest Steel & Alloys is a trusted Mumbai-based supplier of wear resistant and industrial steel plates.

What You Get	Why It Matters
Ready stock in Mumbai	Faster delivery and shorter project delays
Wide size range (3–100 mm thickness)	One supplier for thin liners and heavy plates
Cut-to-size service	Less wastage and quicker fitting on site
Genuine brands: SAILHARD, JSP HARD, TISCRAL, UTTAMHARD	Reliable hardness and mill-sourced material
Quality testing support	Hardness, PMI and other tests to match your requirement
Pan-India supply and export	Delivery to Delhi, Pune, Chennai, Bangalore and overseas buyers
Technical guidance	Help choosing between 200, 400, 450 and 500 BHN plates

We Supply 200 BHN Plates Worldwide

Besides the domestic market, we export 200 BHN steel plates to countries including the UAE, Saudi Arabia, Oman, Kuwait, Qatar, Indonesia, Singapore, South Africa, the United Kingdom, the United States and Australia. You can read more on our export-focused page: 200 BHN steel plates supplier & exporter.

Frequently Asked Questions About 200 BHN Steel Plate

What is Abrasion Resistant Steel Plate 200 BHN?

It is a hot rolled wear resistant steel plate with a hardness of about 200 Brinell, designed to resist sliding abrasion while staying easy to weld and fabricate.

Which thickness and sizes are available?

We supply thickness from 3 mm to 100 mm, width from 1000 mm to 3000 mm and length up to 12000 mm. Cut sizes are available on request.

Which brands of 200 BHN plate do you stock?

We supply SAILHARD, JSP HARD, TISCRAL and UTTAMHARD / EVONITH HARD plates.

Is 200 BHN plate weldable?

Yes. Weldability is excellent, and the plate can be cut, bent and welded with common fabrication methods.

Where is 200 BHN abrasion resistant plate used?

It is used for liner plates, chutes, silos, hoppers, conveyor plates, dumper bodies, loaders, pumps and general machinery parts across mining, cement, power, automobile and chemical industries.

Do you export 200 BHN steel plates?

Yes. We ship to customers in the Middle East, Africa, Asia, Europe, the Americas and Australia.

How can I get the price of 200 BHN steel plate?

Price depends on the brand, thickness, quantity and delivery location. Send your requirement by phone, WhatsApp or email (details below) and we will reply with a quotation.

Get the Best Quote for Abrasion Resistant Steel Plate 200 BHN

Ready to buy 200 BHN abrasion resistant steel plate for your plant, workshop or project? Send us your grade, thickness, size and quantity, and our team will respond with the best price and delivery time.

Contact Conquest Steel & Alloys

Contact Detail	Information
Company	Conquest Steel & Alloys
Address	Shreepati Castle – D1, No.10 & 11, 1st Floor, 11th Khethwadi, Mumbai, Maharashtra – 400004, India
Mobile / WhatsApp	+91 9820857494
Phone	+91 9619554228
Email	amit.jain@csteel.in, csa@csteel.in
Website	www.steelalloys.co.in
Product Page	Abrasion Resistant Steel Plate 200 BHN
Export Page	200 BHN Steel Plates Supplier & Exporter
Business Hours	Monday to Saturday, 10 am – 6 pm

Explore More Steel Plates from Conquest Steel

• Corten Steel Plate / Sheet
• Wear Resistant Steel
• Manganese Steel
• Boiler Quality & Pressure Vessel Steel
• High Strength Steel Plates
• Our Blog | Contact Us

Call or WhatsApp +91 9820857494 today for Abrasion Resistant Steel Plate 200 BHN – stock, price and fast delivery from Mumbai.

Abrasion Resistant Steel Plate 200 BHN Specification:

India Price :	Min- 65 INR Per Kg / Max- 80 INR Per Kg
USD Price :	Min- 0.74 USD Per Kg / Max- 0.91 USD Per Kg
Grade :	200 BHN
Hardness :	~200 Brinell
Thickness Range :	6mm to 50mm
Width :	Up to 2500mm
Length :	Up to 12000mm
Weldability :	Excellent
Machinability :	Very Good
Applications :	Hoppers, Silos, Fabrication, Liners
Material Origin :	Indian / Equivalent to IS Standard
Availability :	Ex-stock with Mill Test Certificate