Definition: ABREX 500 is a quenched and tempered abrasion-resistant steel plate with a nominal hardness of 500 HBW. It resists crushing, sliding wear and impact from sand, stone and ore in mining, crushing and construction equipment.
Conquest Steel & Alloys supplies ABREX 500 plates and abrasion resistant 500 plates in India from Mumbai. We incorporated in 2008, and our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain.
Buyers search for this plate under several names, including ABREX 500 plates, abrasion resistant 500 plates, AR 500 plates, ABREX 500 wear plates and Sumihard 500 plates. This page explains the grade, its specification, chemistry and mechanical properties, and where to use it, so you can compare suppliers before you send an enquiry.
ABREX 500 plate is a hot-rolled, quenched and tempered abrasion-resistant steel plate for equipment that faces severe wear. Its hardness typically runs between 450 and 530 HBW, with a mill hardness of about 515 BHN
Mills reach this hardness through quenching and tempering. Quenching cools the hot plate rapidly to harden it, and tempering reheats it to a lower temperature to restore toughness. The plate resists abrasion from sand, earth and rock, and it stays tough enough to resist cracking under impact.
ABREX 500 resists abrasion, and Corten resists atmospheric rust. They solve different problems, and buyers should never swap them.
Corten steel is a weathering steel whose copper-chromium-nickel alloying forms a tight, stable rust layer called a patina. That layer slows further corrosion in open air.
Buyers specify Corten (under standards such as ASTM A588 or IS 11587) for facade cladding and outdoor structures because of its atmospheric corrosion resistance. Corten is not a wear resistant steel and offers no meaningful abrasion resistance. If your equipment fights abrasion, choose ABREX 500. If it fights outdoor rust, ask us about Corten.
ABREX 500 plate typically costs ₹120 to ₹200 per kg in India, and price rises with thickness and falls with order size. Every figure below is indicative only. It depends on grade, thickness, quantity, cutting needs and current market rates. These figures are not fixed quotes.
| Product form | Thickness | Indicative (₹/kg) | Indicative (₹/tonne) |
|---|---|---|---|
| ABREX 500 plate | 5 to 10 mm | 125 to 165 | 1,25,000 to 1,65,000 |
| ABREX 500 plate | 10 to 20 mm | 120 to 160 | 1,20,000 to 1,60,000 |
| ABREX 500 plate | 20 to 40 mm | 125 to 165 | 1,25,000 to 1,65,000 |
| ABREX 500 plate | 40 to 80 mm | 140 to 185 | 1,40,000 to 1,85,000 |
| ABREX 500 plate | 80 to 120 mm | 150 to 200 | 1,50,000 to 2,00,000 |
ABREX 500 is a plate grade, so we list no coil, pipe or tube rows. Judge cost by total cost of ownership, not price per kg alone. A harder plate costs more per kilogram, but it can cut replacement frequency and downtime in severe abrasion.
ABREX 500 allows up to 0.35% carbon and adds nickel, chromium, molybdenum and boron for hardenability. All elements are maximum percentages. Confirm the exact analysis on the mill test certificate, because limits vary with plate thickness.
| Grade – Element | Value (%) |
|---|---|
| ABREX 500 – C | 0.35 |
| ABREX 500 – Si | 0.70 |
| ABREX 500 – Mn | 2.00 |
| ABREX 500 – P | 0.015 |
| ABREX 500 – S | 0.010 |
| ABREX 500 – Ni | 1.00 |
| ABREX 500 – Cr | 1.20 |
| ABREX 500 – Mo | 0.60 |
| ABREX 500 – B | 0.005 |
Why chemistry matters: Higher carbon and alloy levels raise hardness, but they also raise the risk of cracking during welding. Plan preheat, interpass temperature and heat input with care, and ask for the carbon equivalent value on the mill test certificate
ABREX 500 delivers 470 to 530 HBW in plates up to 32 mm thick, and 450 to 540 HBW in plates from 32 to 80 mm. Hardness drops slightly in thicker sections, because the core cools more slowly during quenching.
| Thickness | Hardness (HBW) |
|---|---|
| 4 to 32 mm | 470 to 530 |
| 32 to 80 mm | 450 to 540 |
| Above 80 mm | - |
| Property | Value |
|---|---|
| Elongation (min) | 10% |
| Charpy V impact (longitudinal) | Tested at -40°C, value |
| Yield strength | - |
| Tensile strength | - |
We distribute ABREX 500 in several forms and related names, so you can match your drawing or specification. Availability depends on stock [CONFIRM STOCK].
Industries use ABREX 500 where abrasion is severe and ordinary steel wears out fast. The plate cuts replacement frequency and downtime.
Conquest Steel & Alloys is a Mumbai-based stockist and supplier of ABREX 500 plates that works with manufacturers and mills following international plate production guidelines. Our sourcing and supply exercises are interconnected, which supports on-time delivery.
Our growth in facts:
We plan to add a logistics team to improve conveyance of goods and reduce costs for customers.
Trust signals you can verify:
Our network reaches customers across India and abroad. Our promoters and partners bring 30 years of steel sourcing, stocking and supply chain experience, and Conquest Steel & Alloys has built its customer network since 2008.
We supply our abrasion resistant 500 wear plates to these countries
Algeria, Italy, Israel, Mexico, Chile, Malaysia, Brazil, Hungary, Vietnam, Afghanistan, Tunisia, Costa Rica, Switzerland, Czech Republic, Kuwait, Angola, Greece, Australia, Kenya, Denmark, Qatar, Romania, Trinidad & Tobago, Canada, Germany, Croatia, Austria, Singapore, Slovakia, Gambia, Taiwan, United Arab Emirates, United Kingdom, Ghana, Turkey, Poland, Lithuania, Philippines, Kazakhstan, Gabon, New Zealand, Tibet, Serbia, Pakistan, Thailand, Azerbaijan, Argentina, United States, Bolivia, Indonesia, Bangladesh, Iran, Saudi Arabia, Colombia, Estonia, South Korea, Bahrain, Lebanon, Ecuador, Namibia, South Africa, Portugal, Finland, Ireland, Sri Lanka, Libya, Iraq, Sweden, Bhutan, Jordan, Puerto Rico, Mongolia, Venezuela, Oman, Nigeria, Ukraine, France, Norway, Peru, Bulgaria, China, Netherlands, Belarus, Belgium, India, Japan, Hong Kong, Spain, Nepal, Egypt, Russia, Zimbabwe, Macau, Morocco and Yemen.
We supply our abrasion resistant 500 steel plate to these cities
Algiers, Secunderabad, Vung Tau, Coimbatore, Doha, Sharjah, Howrah, Chiyoda, La Victoria, Kuala Lumpur, Lagos, Ankara, Hyderabad, Perth, Gurgaon, Muscat, Port-of-Spain, Manama, Tehran, Faridabad, Los Angeles, Surat, Pimpri-Chinchwad, Houston, New York, New Delhi, Al Jubail, Kuwait City, Calgary, Jakarta, Mexico City, Bogota, Bhopal, Cairo, Seoul, Al Khobar, Moscow, Milan, Jamshedpur, Busan, Ahmedabad, Madrid, Rajkot, Navi Mumbai, Riyadh, Ludhiana, Atyrau, Colombo, Abu Dhabi, Singapore, Courbevoie, Kanpur, Chennai, Bangkok, Aberdeen, Baroda, Dubai, Dallas, Nagpur, Gimhae-si, Caracas, Ahvaz, Hong Kong, Chandigarh, Ernakulam, Pune, Ho Chi Minh City, Istanbul, Santiago, Melbourne, Jeddah, London, Brisbane, Hanoi, Ranchi, Noida, Karachi, Kolkata, Indore, Bengaluru, Geoje-si, Sydney, Toronto, Vadodara, Mumbai, Thane, Granada, Rio de Janeiro, Edmonton, Lahore, Petaling Jaya, Jaipur, Thiruvananthapuram, Ulsan, Dammam, Montreal, Nashik, Visakhapatnam and Haryana.
ABREX 500 is a quenched and tempered abrasion-resistant steel plate with a nominal hardness of 500 HBW. It resists crushing, sliding wear and impact from sand, stone and ore. Mining, crushing and construction firms use it for liners, cutting edges and dump truck bodies.
Both names describe 500 HBW-class abrasion-resistant plate, but ABREX 500 is a mill brand name, while AR 500 is a generic term. Each mill sets its own chemistry and test limits, so check the mill test certificate when you need a specific brand or specification.
ABREX 500 measures about 470 to 530 HBW in plates up to 32 mm thick, and about 450 to 540 HBW from 32 to 80 mm. Exact values depend on thickness and heat treatment. Confirm the measured hardness on the mill test certificate before you order.
ABREX 500 is harder, at about 500 HBW, so it lasts longer in severe abrasion from sharp, hard material. ABREX 400 offers more toughness, easier forming and lower preheat demands. Choose ABREX 400 for general abrasion with moderate impact, and ABREX 500 for the harshest wear.
Yes. Fabricators can weld, drill, mill and cut ABREX 500 with correct procedures, including controlled preheat, interpass temperature and heat input. Conquest Steel & Alloys offers oxyfuel cutting at Kalamboli and plasma and oxyfuel cutting at Taloja, so you can order plates cut to size.
No. Corten is a weathering steel that forms a protective patina for atmospheric corrosion resistance. It does not have the hardness needed for abrasion resistance. For crushing or sliding wear, choose an abrasion-resistant grade such as ABREX 500. Use Corten for facade cladding and outdoor structures.
Send your thickness, width, length, quantity, delivery location and required documents to Conquest Steel & Alloys in Mumbai. The team checks current stock and market rates, then shares a written quote. The indicative prices on this page are not fixed quotes.
ABREX 500 plates give your equipment a strong defence against crushing, sliding wear and impact. With a hardness of about 470 to 530 HBW, a quenched and tempered structure and good workability, the grade suits cutting edges, hoppers, dump truck liners, ore scrapers, screen plates, conveyor buckets and stone crusher liner plates. It outlasts mild steel in severe abrasion, and it lowers total cost of ownership once you count downtime and replacement labour, not only price per kilogram.
Conquest Steel & Alloys has supplied steel plates from Mumbai since 2008. Our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain. We source from manufacturers and mills that follow international plate production guidelines, hold stock in Kalamboli and Taloja, and cut plates to size with oxyfuel and plasma facilities. Our in-house quality team performs ultrasonic testing, and we arrange documentation for quality records.
Choose the hardness that fits your duty. ABREX 500 suits severe abrasion from sharp, hard material. If your application needs more toughness or easier forming, compare ABREX 400 with our team before you order. If you need weather resistance instead of wear resistance, ask about Corten.
Ready to order? Send your thickness, width, length, quantity and delivery location. Our Mumbai team will confirm availability and share a written quote. Request a quote today, or call us on for a technical consultation.
| Grade : | ABREX 500 |
|---|---|
| Hardness : | ~470-530 HBW |
| Thickness : | 5 mm to 100 mm |
| Width : | Up to 2500 mm |
| Length : | Up to 12000 mm |
| Yield Strength : | ≥1200 MPA |
| Tensile Strength : | ≥1400 MPA |
| Heat Treatment : | Quenched and Tempered |
Abrasion Resistant ROCKSTAR 400 Steel Plates are quenched and tempered wear..
Rockstar 400 Plates are premium wear resistant steel plates designed for he..
Abrasion Resistant ROCKSTAR 500 Steel Plates are quenched and tempered wear..