Definition: NM 500 is a quenched and tempered abrasion-resistant steel plate with a nominal hardness of 500 HBW. It resists crushing, sliding wear and high-speed impact from rough, sharp material in mining, construction and recycling equipment.
Conquest Steel & Alloys supplies NM 500 wear-resistant steel plates in India from Mumbai. We incorporated in 2008, and our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain.
Abrasion resistant 500 steel plate is a hardened steel plate that resists crushing and high-speed impact from rough, sharp and barbed material. The “500” refers to its nominal Brinell hardness (HBW or BHN). Mills typically supply it at about 470 to 530 HBW. Mills reach this hardness through quenching and tempering. Quenching cools the hot plate rapidly to harden it, and tempering reheats it to a lower temperature to restore toughness. The result is a plate that stays hard against wear and tough enough to resist cracking. Many mills sell 500 HBW-class plate under their own brand names. Trade names such as NM 500, AR 500, ABREX 500, ROCKSTAR 500 and RAEX 500 all describe this hardness class, although each mill sets its own chemistry and test limits.
NM 500 resists abrasion, and Corten resists atmospheric rust. They solve different problems, and buyers should never swap them.
Corten steel is a weathering steel whose copper-chromium-nickel alloying forms a tight, stable rust layer called a patina. That layer slows further corrosion in open air.
Buyers specify Corten (under standards such as ASTM A588 or IS 11587) for facade cladding and outdoor structures because of its atmospheric corrosion resistance. Corten is not a wear resistant steel and offers no meaningful abrasion resistance. If your equipment fights abrasion, choose NM 500. If it fights outdoor rust, ask us about Corten.
We stock NM 500 abrasion resistant plates and supply them full-size or cut to your dimensions. Our teams handle storage, cutting, packing and dispatch from Mumbai-area facilities.
What you get:
Plate properties in brief: weldable, suited to cold bending within limits, grain-refined, high in impact toughness, and hardened and toughened for durability.
NM 500 plates give you very high hardness, uniform quality and good fabrication behaviour in one product. Four features matter most to buyers.
Mills roll NM 500 to controlled thickness tolerances, so each plate performs the same way across a batch. Uniform hardness means predictable wear life, which helps you plan maintenance.
Higher hardness can let designers specify thinner wear plate for the same life. A thinner liner or bucket lip cuts the weight of dump bodies and cargo vehicles, which can improve payload. Confirm the thickness with your design engineer.
NM 500 bends cold and welds, but its high hardness demands care. Cold bending is a cost-effective way to form pipelines and machine parts. Use generous bend radii, controlled preheat and low heat input, and confirm limits with the mill data.
Cutting plate to size lets you build custom wear parts that shield machines from erosion. NM 500 is far harder than mild steel, so custom liners, edges and guards protect machines for longer.
NM 500 plate typically costs ₹110 to ₹190 per kg in India, and branded imported plate costs more than standard grades. Every figure is indicative only and depends on grade, thickness, quantity, brand, cutting needs and market rates. These figures are not fixed quotes.
| Product form | Thickness | Indicative (₹/kg) | Indicative (₹/tonne) |
|---|---|---|---|
| NM 500 plate | 5 to 10 mm | 115 to 150 | 1,15,000 to 1,50,000 |
| NM 500 plate | 10 to 20 mm | 110 to 145 | 1,10,000 to 1,45,000 |
| NM 500 plate | 20 to 40 mm | 115 to 150 | 1,15,000 to 1,50,000 |
| NM 500 plate | 40 to 80 mm | 125 to 165 | 1,25,000 to 1,65,000 |
| NM 500 plate | 80 to 150 mm | 140 to 190 | 1,40,000 to 1,90,000 |
NM 500 is a plate grade, so we list no coil, pipe or tube rows. Judge cost by total cost of ownership, not price per kg alone. A harder plate costs more per kilogram, but it can last much longer in severe abrasion and reduce downtime.
NM 500 delivers about 500 HBW hardness and a typical impact energy of 37 J at -40°C. Higher carbon equivalent values than softer grades mean welders must plan preheat carefully.
Carbon equivalent by thickness (CET with CEV in brackets):
| Thickness (mm) | CET (CEV) |
|---|---|
| Up to 5 | 0.34 (0.49) |
| 5 to 10 | 0.36 (0.52) |
| 10 to 20 | 0.43 (0.64) |
| 20 to 40 | 0.45 (0.66) |
| 40 to 103 | 0.47 (0.75) |
Why this matters: CET and CEV tell your welders how much preheat the plate needs. Higher values raise the risk of cracking, so thick sections need stricter control of preheat, interpass temperature and heat input.
Impact properties
| Property | Value |
|---|---|
| Charpy V impact, longitudinal (10 x 10 mm specimen) | 37 J at -40°C (typical) [VERIFY WITH MTC] |
| Hardness | About 500 HBW |
Chemical composition (heat analysis): [PLACEHOLDER: ADD C, Si, Mn, P, S, Cr, Ni, Mo and B LIMITS FROM THE MILL DATA SHEET]. Elemental limits vary by mill and thickness, so we share the exact analysis on the mill test certificate.
Industries use NM 500, including ROCKSTAR 500, where crushing, impact and sliding wear destroy ordinary steel. The plate cuts replacement frequency in the toughest duties.
Choose NM 500 for severe abrasion from sharp, hard material, and choose NM 400 for general abrasion with moderate impact. NM 500 is harder, and NM 400 is tougher and easier to form.
| Factor | NM 400 | NM 500 |
|---|---|---|
| Nominal hardness | About 400 HBW (360 to 440 HBW) | About 500 HBW (470 to 530 HBW) [VERIFY] |
| Typical impact energy | 45 J at -40°C | 37 J at -40°C [VERIFY] |
| Thickness covered | 3 to 130 mm | 5 to 150 mm |
| Wear life | Good in general abrasion | Longer in severe abrasion |
| Forming and cutting | Easier | Needs more care |
| Weld preheat | Lower in thin sections | Higher, so plan carefully |
| Typical use | Chutes, hoppers, liners, truck bodies | Excavator buckets, crusher liners, hammers |
Rule of thumb:
Send your application details, and our team will help you match the grade to your duty.
We distribute many 500 HBW-class brands and related grades, so you can match your drawing or specification. Availability depends on stock [CONFIRM BRANDS IN STOCK].
Each 500 HBW-class brand belongs to a specific mill, and hardness ranges differ slightly between brands. The table lists reference brands, producers, countries and hardness ranges. It helps you identify equivalents. It does not claim that Conquest Steel & Alloys stocks every brand .
|
Brand |
Manufacturer, Country & Hardness Details |
|---|---|
|
Wear Resistant Steel 500 |
Country: Sweden; Hardness: 470–530 HBW |
|
NM 500 |
Country: Sweden; Hardness: 470–530 HBW |
|
ROCKHARD 500 |
Country: Sweden; Hardness: 470–530 HBW |
|
Abrasion Resistant 550 |
Country: Sweden; Hardness: 525–575 HBW |
|
Abrasion Resistant 600 |
Country: Sweden; Hardness: 570–640 HBW |
|
QUARD 500 |
Manufacturer: Duferco; Country: Belgium; Hardness: Not specified |
|
JFE EVERHARD 500LE |
Manufacturer: JFE Steel Corporation; Country: Japan; Hardness: 477–556 HBW |
|
SUMIHARD K-500 |
Manufacturer: Sumitomo Metals; Country: Japan; Hardness: Not specified |
|
ABRAZO 500 |
Manufacturer: Tata UK Ltd.; Country: UK; Hardness: 450–550 HBW |
|
RAEX 500 |
Manufacturer: Ruukki; Country: Finland; Hardness: 450–540 HBW |
|
DILLIDUR 500V |
Manufacturer: Dillinger Hütte; Country: Germany; Hardness: 450–550 HBW |
|
XAR 500 |
Manufacturer: ThyssenKrupp; Country: Germany; Hardness: 460–530 HBW |
|
XAR 600 |
Manufacturer: ThyssenKrupp; Country: Germany; Hardness: 560–640 HBW |
|
BRINAR 500 |
Manufacturer: Ilsenburger Grobblech; Country: Germany; Hardness: Not specified |
|
FORA 500 |
Manufacturer: Industeel; Country: Belgium; Hardness: 460–540 HBW |
|
NICRODUR 500 |
Manufacturer: Acroni; Country: Europe; Hardness: Not specified |
|
CREUSABRO 8000 |
Manufacturer: Industeel; Country: Europe; Hardness: Not specified |
|
WELHARD 500 |
Manufacturer: NSC; Country: Japan; Hardness: Not specified |
|
SWEBOR 500 |
Manufacturer: Swebor Stål; Country: Sweden; Hardness: 450–550 HBW |
|
BIS Plate 500 |
Manufacturer: Bisalloy Steels Pty Ltd; Country: Australia; Hardness: 477–534 HBW |
|
ROCKSTAR 500 |
Manufacturer: Essar Steel India Ltd.; Country: India; Hardness: 450–540 HBW |
|
ALGO TUF 500 |
Manufacturer: Essar Steel India Ltd.; Country: India; Hardness: 477–545 HBW |
|
ABREX 500 |
Manufacturer: NSSMC; Country: Japan; Hardness: 450–550 HBW |
|
WEARALLOY 500 |
Manufacturer: Ford Steel; Country: Japan; Hardness: 477–544 HBW |
|
HARDWEAR 500F |
Manufacturer: ArcelorMittal; Country: Luxembourg; Hardness: 460–544 HBW |
|
ROC 500 |
Manufacturer: ArcelorMittal; Country: Luxembourg; Hardness: 444–555 HBW |
Our network reaches customers across India and abroad. Our promoters and partners bring 30 years of steel sourcing, stocking and supply chain experience, and Conquest Steel & Alloys has built its customer network since 2008.
We supply our NM 500 wear plates to these countries [CONFIRM COUNTRY LIST BEFORE PUBLISHING]:
United Arab Emirates, Bangladesh, Ukraine, Kenya, Romania, Morocco, Colombia, Hungary, Brazil, Iran, Jordan, Qatar, Nigeria, France, Mongolia, South Africa, Turkey, Ghana, Kuwait, Trinidad & Tobago, Tunisia, Iraq, Thailand, Ireland, Gabon, Mexico, Namibia, Belarus, Croatia, Sri Lanka, Indonesia, Sweden, Saudi Arabia, Angola, Canada, Bhutan, Bulgaria, Italy, Zimbabwe, Finland, Azerbaijan, Kazakhstan, Slovakia, Singapore, New Zealand, Austria, Taiwan, Egypt, Libya, Tibet, Belgium, Pakistan, Oman, Peru, Algeria, South Korea, Japan, China, Poland, Venezuela, Gambia, Hong Kong, Lebanon, Vietnam, Czech Republic, Yemen, Russia, Germany, Spain, Lithuania, Serbia, Macau, Nepal, Costa Rica, Denmark, Chile, Estonia, Israel, United Kingdom, Bahrain, Australia, Norway, Switzerland, Malaysia, Puerto Rico, Argentina, Philippines, Afghanistan, Greece, United States, Ecuador, India, Portugal, Bolivia and Netherlands.
We supply our NM 500 steel plate to these cities [CONFIRM CITY LIST BEFORE PUBLISHING]:
Al Khobar, Ludhiana, Karachi, Tehran, Bogota, Ahvaz, Ankara, Gimhae-si, Busan, Indore, Caracas, Ho Chi Minh City, Vadodara, Hanoi, Dammam, Secunderabad, Melbourne, Edmonton, Pimpri-Chinchwad, Montreal, Rio de Janeiro, Milan, Perth, Bangkok, Moscow, Chiyoda, Kolkata, Courbevoie, Bhopal, Madrid, Dallas, Visakhapatnam, Toronto, Petaling Jaya, Ranchi, Algiers, Seoul, Calgary, Coimbatore, Doha, Istanbul, Faridabad, Sydney, Port-of-Spain, Nashik, Riyadh, Mumbai, Hyderabad, Abu Dhabi, New Delhi, Nagpur, Kuala Lumpur, Jaipur, Kanpur, Los Angeles, Jamshedpur, Bengaluru, Brisbane, Sharjah, London, Vung Tau, Mexico City, Ulsan, Houston, Ahmedabad, Chandigarh, New York, Gurgaon, Lagos, Atyrau, Manama, Lahore, Granada, Ernakulam, Rajkot, Colombo, Kuwait City, Dubai, Surat, Thane, Geoje-si, La Victoria, Singapore, Noida, Hong Kong, Al Jubail, Jeddah, Baroda, Howrah, Aberdeen, Jakarta, Chennai, Cairo, Navi Mumbai, Santiago, Thiruvananthapuram, Haryana, Muscat and Pune.
Conquest Steel & Alloys is a Mumbai-based stockist and supplier of NM 500 plates that works with manufacturers and mills following international plate production guidelines. Our sourcing and supply exercises are interconnected, which supports on-time delivery.
Our growth in facts:
We plan to add a logistics team to improve conveyance of goods and reduce costs for customers.
Trust signals you can verify:
NM 500 is a quenched and tempered abrasion-resistant steel plate with a nominal hardness of 500 HBW. It resists crushing, sliding wear and high-speed impact from sharp, rocky material. Mining, construction and recycling operations use it for excavator buckets, crusher liners and railroad car bodies.
NM 500 is harder, at about 470 to 530 HBW against 360 to 440 HBW for NM 400. Choose NM 500 for severe abrasion and NM 400 for general abrasion with moderate impact. NM 400 also offers higher impact energy and easier forming, so match the grade to your duty.
NM 500 plate has a nominal hardness of 500 HBW, and mills typically supply it in a range of about 470 to 530 HBW. Exact values vary by thickness and manufacturer. Always confirm the measured hardness on the mill test certificate before you order for critical duty.
Both names describe 500 HBW-class abrasion-resistant plate, but each mill sets its own chemistry, tolerances and test limits. ABREX 500, SUMIHARD 500, ROCKSTAR 500, RAEX 500 and XAR 500 are mill brand names. Check the mill test certificate to confirm that a plate meets your requirement.
Yes, but with care. NM 500 welds and cold bends, yet its high hardness demands controlled preheat, low heat input and generous bend radii to avoid cracking. Confirm the minimum bend radius and welding procedure with the mill data. We supply plates cut to size to reduce on-site work.
No. Corten is a weathering steel that forms a protective patina for atmospheric corrosion resistance. It does not have the hardness needed for abrasion resistance. For crushing or sliding wear, choose an abrasion-resistant grade such as NM 500. Use Corten for facade cladding and outdoor structures.
Send your thickness, width, length, quantity, delivery location and required documents to Conquest Steel & Alloys in Mumbai. The team checks current stock and market rates, then shares a written quote. The indicative prices on this page are not fixed quotes.
NM 500 wear-resistant steel plates give your equipment a strong defence against crushing, sliding wear and high-speed impact. With a nominal hardness of 500 HBW, a quenched and tempered structure and a typical Charpy V impact energy of 37 J at -40°C , the grade suits excavator buckets, crusher liners, hydraulic hammer protection and mining railroad cars. It outlasts mild steel by a wide margin, and it lowers total cost of ownership when you count downtime, not only price per kilogram.
Conquest Steel & Alloys has supplied steel plates from Mumbai since 2008, backed by 30 years of promoter and partner experience in steel sourcing, stocking and supply chain. We source from manufacturers and mills that follow international plate production guidelines. We hold stock in Kalamboli and Taloja, cut plates to size with oxyfuel and plasma facilities, and run ultrasonic testing through our in-house quality team. We also arrange documentation for quality records, including the mill test certificate .
Choose the right hardness for your duty. NM 500 fits severe abrasion where material is sharp, hard and abrasive. If your equipment needs more toughness and easier forming, compare NM 400 with our team before you order. If you need atmospheric corrosion resistance instead of wear resistance, ask about Corten.
Ready to order? Send your grade, thickness, width, length, quantity and delivery location. Our Mumbai team will confirm availability and share a written quote. Request a quote today, or call us on for a technical consultation.
| India Price : | Min- 110 INR Per Kg / Max- 130 INR Per Kg |
|---|---|
| USD Price : | Min- 1.25 USD Per Kg / Max- 1.48 USD Per Kg |
| Grade : | NM 500 |
| Thickness : | 6mm to 100mm |
| Width : | Up to 3000mm |
| Length : | Up to 12000mm |
| Hardness : | ~500 HBW |
| Yield Strength : | ≥1200 MPA |
| Tensile Strength : | ≥1450 MPA |
Abrasion Resistant ROCKSTAR 400 Steel Plates are quenched and tempered wear..
Rockstar 400 Plates are premium wear resistant steel plates designed for he..
Abrasion Resistant ROCKSTAR 500 Steel Plates are quenched and tempered wear..