ASTM A606 TYPE 2

ASTM A606 Type 2 Corten Steel Plate Supplier - Explore Specifications & Price - Conquest Steel & Alloys

Corten steel is a weather resistant, high-strength low-alloy steel. Its copper-bearing chemistry forms a dense, adherent rust layer called patina when exposed to air, which seals the surface and slows further atmospheric corrosion. Conquest Steel & Alloys is a Mumbai-based stockist of weathering steel plates and products. We have supplied steel plates since 2008, backed by 30 years of promoter experience in steel sourcing, stocking and supply chain. We stock and supply ASTM A606 Type 2 Corten Steel Plates in 3/16 inch to 3/4 inch thickness, with cutting to size, ultrasonic testing and documentation for quality records. Request a quote with your grade, thickness, quantity and cut list. We reply in writing.


What is ASTM A606 Type 2 Corten Steel Plate?

ASTM A606 Type 2 Corten steel plate is a hot-rolled, high-strength low-alloy structural steel plate built to resist atmospheric corrosion. In open air, its surface forms a patina that protects the steel underneath from further rusting.

Weathering steels build this patina through alloying, not coating. Copper-chromium-nickel alloying is common across the weathering steel family, and phosphorus can add to the effect. ASTM A606 Type 2 specifies a minimum copper content of 0.20%. The copper sits inside the steel and does not form a separate layer on the surface.


Key benefits of ASTM A606 Type 2 plates:

  • No painting needed for most atmospheric exposures, which cuts coating and maintenance costs
  • High yield and tensile strength for a low-alloy steel
  • Strong atmospheric corrosion resistance across varied weather conditions
  • Lower total cost of ownership over the service life, since repainting and repair visits drop

 

 

Weathering steel grades and standards

ASTM A606 Type 2 belongs to a wider family of weathering steels, and the right grade depends on your project specification. Use this table for orientation only, and follow the standard named in your drawings.

Grade / Standard What it is Typical focus
ASTM A606 Type 2 Hot-rolled HSLA weathering steel, min 0.20% Cu Roofing, containers, formed and fabricated parts
ASTM A606 Type 4 Weathering steel in the same A606 standard  Exposed structures needing higher corrosion resistance
ASTM A588 Structural weathering steel Bridges and heavy structural members
IS 11587 Indian standard for structural weather resistant steel Projects specifying Indian standards

Availability varies by grade. Contact us to confirm.


ASTM A606 Equivalent

ASTM A606 Type 2 has no exact one-to-one equivalent, so treat cross-references as a guide and not a substitution. The table below lists reference designations supplied for this grade.

DIN AFNOR BS GB UNS
1.0402 C22 C22 20 G10200

ASTM A588 and IS 11587 are also weathering steels, but their chemistry, thickness scope and mechanical limits differ from A606 Type 2. Do not substitute one for another without engineer approval.


ASTM A606 Type 2 Corten Plate Chemical Composition

ASTM A606 Type 2 plate is a low-alloy steel with a maximum of 0.22% carbon and a minimum of 0.20% copper. Copper is the main driver of the protective patina.

Element Content
Carbon (C) 0.22% max
Manganese (Mn) 1.25% max
Sulphur (S) 0.04% max
Copper (Cu) 0.20% min
Phosphorus (P) -

Check actual chemistry on the mill test certificate for your heat. Values above are standard limits, not certified results.

Carbon and manganese support strength. Copper, and phosphorus where present, support atmospheric corrosion resistance.


ASTM A606 Type 2 Corten Steel Plate Mechanical Properties

ASTM A606 Type 2 plate delivers a minimum yield strength of 50 ksi, a minimum tensile strength of 70 ksi and a minimum elongation of 22% in 2 inches. These are minimum values, and designers should work from the certified values on the MTC.

Property Minimum value
Tensile strength 70 ksi (about 485 MPa)
Yield strength 50 ksi (about 345 MPa)
Elongation 22% in 2 inch (50 mm)


Other Types Of ASTM A606 Type 2 Corten Steel Plate

Conquest Steel & Alloys supplies ASTM A606 Type 2 in several forms, named differently across industries. All refer to the same grade family:

  • ASTM A606 Type 2 Corten Steel Plates and A606 Corten Type 2 Plate
  • ASTM A606 Type 2 Corten Steel Sheets and A606 Type 2 HR Plates (hot-rolled)
  • ASTM A606 Type 2 Weather Resistant Steel Plate and Weathering Structural Steel Plates
  • A606 Type 2 Corrosion Resistant Steel Plate
  • ASTM A606 Type 2 High-Strength Low-alloy Structural Steel Plates
  • A606 Corten Steel Hot Rolled Plates; cold rolled variants on request 

We work as a stockist, supplier, dealer and distributor for these products in India, and we ship overseas as an exporter.


Our Global Network

Conquest Steel & Alloys supplies A606 Type 2 Corten steel plate to customers in more than 90 countries. Regions served include:

  • Asia-Pacific: Japan, Taiwan, South Korea, China, Hong Kong, Macau, Mongolia, Thailand, Vietnam, Philippines, Malaysia, Singapore, Indonesia, Australia, New Zealand
  • South Asia: India, Pakistan, Bangladesh, Sri Lanka, Nepal, Bhutan, Afghanistan
  • Middle East and Central Asia: UAE, Saudi Arabia, Qatar, Kuwait, Oman, Bahrain, Iraq, Iran, Jordan, Lebanon, Yemen, Israel, Turkey, Azerbaijan, Kazakhstan
  • Europe: United Kingdom, Ireland, France, Germany, Italy, Spain, Portugal, Netherlands, Belgium, Switzerland, Austria, Czech Republic, Slovakia, Poland, Hungary, Romania, Bulgaria, Croatia, Serbia, Greece, Sweden, Norway, Denmark, Finland, Estonia, Lithuania, Ukraine, Belarus, Russia
  • Africa: Egypt, Libya, Algeria, Morocco, Tunisia, Nigeria, Ghana, Gambia, Kenya, Angola, Namibia, Zimbabwe, South Africa, Gabon
  • Americas: United States, Canada, Mexico, Puerto Rico, Costa Rica, Trinidad & Tobago, Colombia, Venezuela, Ecuador, Peru, Bolivia, Brazil, Chile, Argentina


Common Applications

ASTM A606 Type 2 Corten plates suit outdoor structures and equipment that need strength and corrosion resistance without paint. Typical uses:

  • Roofing materials that must withstand years of sun, rain and wind
  • Bridges and harbour structures exposed to open air
  • Towers and oil derricks where repainting at height is costly
  • Containers and transport equipment, including vehicles
  • Facade cladding and architectural panels that use the patina as a design feature
  • General construction and structural parts in open-air conditions

Marine splash zones and constantly wet sites can prevent a stable patina. Confirm site conditions with your designer.


Leading ASTM A606 Type 2 Corten Steel Plate Manufacturers & Suppliers in India Since 2008 - Conquest Steel & Alloys

Conquest Steel & Alloys has stocked and supplied steel plates from Mumbai since 2008. We source from mills that follow international plate production guidelines, and we link sourcing and supply so deliveries arrive on time.


Our stockyard history

We have grown from a single stockyard in 2008 to three storage sites near Mumbai.

  • 2008: Headquarters opens in Khetwadi, Mumbai, with a 900 sq.m stockyard at Kalamboli. The yard has two OET cranes and an oxyfuel cutting facility.
  • 2011: Our Taloja stockyard opens (3,000 sq.m) with three OET cranes of 20 tons each, plus plasma and oxyfuel cutting. A team of eight handles stock management, dispatch, cutting and planning.
  • 2015: A 10,000 sq.m warehouse opens at Taloja, half covered and half open. It raises stock capacity ten times over 2008 levels, and 14 staff run stock management, packing, dispatch and cutting.
  • 2024: Our Khetwadi office operates from 1,500 sq.ft, and the total workforce stands at 15.


Testing, documentation and cutting

Our in-house quality team performs ultrasonic testing. We do not perform destructive testing. We arrange documentation for quality records, including [. We also offer cutting to size by plasma and oxyfuel, so plates arrive closer to your final dimensions.

We pack every order using standard industry methods to prevent damage and rust in transit.


Indicative price table

Indicative prices for Corten-grade plate in India typically range from ₹75 to ₹110 per kg, depending on grade, thickness, quantity and market rates. All figures below are indicative only. They are not quotes, and they exclude GST, freight and cutting charges [CONFIRM]. Rates move with the steel market.

Product form Grade Indicative price (₹ per kg) Indicative price (₹ per tonne)
Plate ASTM A606 Type 2 ₹75 to ₹110 ₹75,000 to ₹1,10,000
Coil A606 Type 2 HR ₹70 to ₹105  ₹70,000 to ₹1,05,000
Flat A606 Type 2 ₹80 to ₹120  ₹80,000 to ₹1,20,000
Pipe Corten-grade ₹110 to ₹170  ₹1,10,000 to ₹1,70,000
Tube Corten-grade ₹120 to ₹180  ₹1,20,000 to ₹1,80,000

Subject to grade, thickness, quantity and market rates. Request a written quote for a firm price.



FAQ

What is ASTM A606?

ASTM A606 is a standard specification for high-strength, low-alloy, hot-rolled and cold-rolled steel sheet and strip with improved atmospheric corrosion resistance. It defines Types 2, 4 and 5, covering chemistry and mechanical properties. Type 2 requires a minimum 0.20% copper and offers 50 ksi minimum yield strength.

Is A606 Corten steel?

Yes, in common trade usage. Corten is a weathering steel brand name that buyers use for steels forming a protective patina, and A606 Type 2 and Type 4 both do. Strictly, A606 is an ASTM specification, while Corten is a trade name. Type 4 is the grade most often compared with Corten A.

What are the ASTM standards for steel plates?

ASTM publishes many plate standards, each for a different duty. Common ones include A36 for general structural plate, A572 for high-strength low-alloy plate, A516 for pressure vessel plate, A283 for low and intermediate tensile plate, and A588 or A242 for weathering plate. Choose the standard your project specification names.

What are the differences between A606 and A588 weathering steel grades?

ASTM A606 covers thinner hot-rolled and cold-rolled weathering sheet and strip, while ASTM A588 covers heavier structural plates, shapes and bars. A588 uses copper, chromium and nickel alloying and suits bridges and heavy structures. A606 Type 2 suits roofing, containers and formed parts. Follow the standard in your specification.

Each answer is 47 to 53 words, within your 40 to 60 word range. I kept the last question’s wording exactly as you gave it. If you want a quick-reference table under the last answer, use this:

Feature ASTM A606 (Type 2) ASTM A588
Product form Hot-rolled and cold-rolled sheet and strip Structural plates, shapes and bars
Typical thickness Thinner gauges Heavier sections
Alloying Copper-bearing, min 0.20% Cu Copper, chromium and nickel alloying
Typical use Roofing, containers, formed parts Bridges, heavy structures


Contact Conquest Steel & Alloys For ASTM A606 Type 2 Corten Steel Plate at Best Price in India

ASTM A606 Type 2 Corten Steel Plates give industrial buyers a practical route to durable, low-maintenance structures. The grade combines a minimum yield strength of 50 ksi (345 MPa) with a minimum tensile strength of 70 ksi (485 MPa). Its copper-bearing chemistry forms a protective patina that supports long-term atmospheric corrosion resistance. Designers can often skip painting, which reduces coating cost, shutdown time and repair visits. Over the full service life, that approach lowers total cost of ownership.

Conquest Steel & Alloys has supplied steel plates from Mumbai since 2008. We source from mills that follow international guidelines for plate production, hold stock at our Kalamboli and Taloja stockyards, and offer plasma cutting and oxyfuel cutting for cutting to size. Our in-house quality team runs ultrasonic testing, and we arrange documentation for quality records.

Remember the limits of the grade. Corten resists weather, not abrasion. Detail your structure so water drains freely, and confirm your site conditions before you finalise the design. Always check actual properties against the mill test certificate.

Pricing depends on thickness, quantity, cut requirements and market rates.

Ready to buy ASTM A606 Type 2 Corten Steel Plates in India? Request a quote today. Send your grade, thickness, width, length and quantity to Conquest Steel & Alloys, or call our Mumbai team for a consultation. We reply with a clear, written quotation. 

 

ASTM A606 TYPE 2 Specification:
Specification : Detail
Grade : ASTM A606 Type 2 Corten Steel Plates
Standard : ASTM A606 / ASME SA606
Width : 48
Length : Up to 480
Thickness : 3/16
Type : Corten Steel / High-Strength Low-Alloy Structural Stee
Process : Hot-Rolled (HR)
whatsapp-icon email-icon call-icon