Corten steel is a weathering steel alloyed with copper, chromium and nickel. When exposed to alternating wet and dry cycles, it forms a dense, adherent rust layer called patina that slows further atmospheric corrosion without paint.
ASTM A588 Gr.A Corten steel plate is a high-strength, low-alloy weathering structural plate. Conquest Steel & Alloys, a Mumbai-based stockist, supplier and exporter of weathering steel plates and products since 2008, supplies it in hot rolled form. Bridge builders, fabricators and facade designers use it where steel must stay exposed and last.
ASTM A588 Gr.A is a structural weathering steel plate with improved atmospheric corrosion resistance. The ASTM A588 specification (also published as ASME SA588) covers high-strength low-alloy plate for bolted, riveted and welded construction.
Four alloying elements do most of the work:
The patina starts as a bright orange-brown film. Over months, it darkens and tightens into a barrier that slows further attack. Plain carbon steel keeps flaking, but weathering steel stabilises.
Buyers often search for “A588 Gr A plate manufacturers in Mumbai”. Conquest is a stockist and supplier, not a mill. We source plates from mills that follow international plate production guidelines and supply them from our Mumbai-region yards.
Gr.A is the A588 grade most buyers specify for general weathering structures. Gr.B is a close sibling with slightly different chemistry. Always compare your design code with the mill test certificate before ordering.
| Grade | Standard | How it relates to A588 Gr.A |
|---|---|---|
| ASTM A588 Gr.A | ASTM A588 / ASME SA588 | Reference grade for this page |
| ASTM A588 Gr.B | ASTM A588 | Same family; Cr, Mn, Cu and V limits differ |
| Corten B | Mill designation | Commonly cross-referenced as the nearest equivalent |
| Corten A / ASTM A242 Type 1 | ASTM A242 | Weathering steel with phosphorus; not a drop-in substitute |
| S355J2W+N | EN 10025-5 | European weathering structural grade, comparable in class |
| IS 11587 weather resistant grades | IS 11587 | Indian structural weathering standard |
| IRSM 41-97 | Indian Railways specification | Railway weathering steel; check the exact clauses |
Standards overlap but rarely match line for line. Treat this table as a starting point. Your design engineer should approve any substitution.
| Parameter | Value |
|---|---|
| Grade | ASTM A588 Gr.A Corten steel plate |
| Standard | ASTM A588 / ASME SA588 |
| Thickness | 0.8 mm to 50 mm (stock range) |
| Width | 750 mm to 1,500 mm |
| Length | Up to 12,000 mm |
| Yield strength (min) | 340 MPa, up to 100 mm |
| Tensile strength (min) | 480 MPa, up to 100 mm |
| Supply condition | Hot rolled (HR); other conditions on request |
| Type | Weathering (Corten) steel |
How to estimate plate weight: multiply thickness (mm) × width (m) × length (m) × 7.85. A 10 mm × 1.5 m × 6 m plate weighs about 706.5 kg. Mill tolerances change the final figure, so use this for budgeting only.
The main advantage is long outdoor life with little maintenance. The patina replaces the paint system, which lowers repainting costs and downtime.
Know the limits. Weathering steel needs wet-dry cycling to build its patina. Continuous immersion, burial in wet soil, and constant exposure to salt spray or chloride can prevent a stable patina. Check the exposure class with your engineer before specifying.
No. Corten is a weather resistant steel, not an abrasion resistant (AR) steel. It resists atmospheric corrosion. It does not resist sliding wear, impact abrasion or gouging. Choose AR plates for chutes, liners and crusher parts. Choose A588 Gr.A for exposed structures that must resist weather. Conquest stocks both families, and our team can help you pick the right one.
You use A588 Gr.A wherever steel stays outdoors and repainting is costly or impractical. The grade shines in three design situations:
Fabricators also use the plate for welded base plates, gussets, brackets and built-up sections. Cutting to size from stock reduces scrap and lead time.
A588 Gr.A is a low-carbon steel with controlled copper, chromium, nickel and vanadium. Limits below are maximum unless a range is shown. Heat analysis on the mill test certificate governs.
| Element | Content (%) |
|---|---|
| Carbon (C) | 0.19 max |
| Silicon (Si) | 0.30 to 0.65 |
| Manganese (Mn) | 0.80 to 1.25 |
| Phosphorus (P) | 0.04 max |
| Sulphur (S) | 0.05 max |
| Chromium (Cr) | 0.40 to 0.65 |
| Vanadium (V) | 0.02 to 0.10 |
| Nickel (Ni) | 0.40 max |
| Copper (Cu) | 0.25 to 0.50 |
Copper-chromium-nickel alloying is what separates this steel from ordinary structural plate. Together with silicon and phosphorus control, it lets the patina form and stabilise.
Minimum yield strength is about 340 MPa and minimum tensile strength about 480 MPa for plate up to 100 mm. Strength steps down as thickness rises.
| Thickness range | Min. yield strength (MPa) | Min. tensile strength (MPa) |
|---|---|---|
| Up to 100 mm | 340 | 480 |
| 102 mm to 127 mm | 320 | 460 |
| 127 mm to 203 mm | 290 | 430 |
Yield and tensile figures are transverse minimums. Ask for the mill test certificate with your dispatch so you can confirm the actual lot values against your design requirement.
Besides plain Gr.A plate, Conquest supplies related weathering products and name variants. Buyers often use different names for the same material. Common ones include:
We also stock Corten coil, flat sheet, perforated sheet, hollow sections, flat bar, pipes, tubes, angles, beams and channels. Ask us for a cross-grade quote.
Indicative A588 Gr.A plate pricing in Mumbai runs roughly ₹60 to ₹80 per kg (₹60,000 to ₹80,000 per tonne). These figures are indicative only. Final prices depend on grade, thickness, quantity, cutting and market rates. They are not fixed quotes.
| Product form | Indicative range (₹ per kg) | Indicative range (₹ per tonne) |
|---|---|---|
| ASTM A588 Gr.A plate | 60 to 80 | 60,000 to 80,000 |
| Corten steel plate (general) | 65 to 80 | 65,000 to 80,000 |
| Corten coil | 60 to 90 | 60,000 to 90,000 |
| Corten flat bar | 55 to 75 | 55,000 to 75,000 |
| Corten steel pipe | 55 to 75 | 55,000 to 75,000 |
| Corten steel tube | 60 to 75 | 60,000 to 75,000 |
Three factors move the price most: thickness, order quantity and extra processing such as cutting to size. Request a quote for a firm number.
A588 Gr.A plate appears most in infrastructure, buildings and heavy fabrication. Typical applications include:
For each of these, match the exposure to the grade. Marine splash zones and chloride-heavy sites need a design review first.
Conquest Steel & Alloys has supplied steel plates from Mumbai since 2008. The company draws on 30 years of promoter and partner experience in steel sourcing, stocking and supply chain.
Our footprint grew step by step:
What this means for your order:
Our plan is to add a dedicated logistics team to cut delivery costs for customers.
Conquest supplies ASTM A588 Gr.A Corten plate across India and to export markets.
All exports are subject to applicable trade rules. [PLACEHOLDER: add export documentation and incoterms details if you want to publish them.]
ASTM A588 Grade A has no single identical twin, but several standards cover comparable weathering steels. Common cross-references include Corten B, EN 10025-5 S355J2W and IS 11587 weather resistant grades. Chemistry and strength limits differ between standards, so confirm the match against your specification and the mill test certificate before ordering.
ASTM A588 is a specification for high-strength low-alloy structural steel with improved atmospheric corrosion resistance. Copper, chromium, nickel and vanadium additions let the plate form a protective patina. Grade A plate suits bolted, riveted and welded structures such as bridges and buildings, and it can serve unpainted in suitable environments.
ASTM A588 Gr.A Corten steel plate gives engineers a proven route to durable, low-maintenance structures. Its copper-chromium-nickel alloying builds a stable patina, its strength supports lighter sections, and its weldability keeps fabrication practical. When the environment suits weathering steel, the plate often lowers total cost of ownership by reducing paint, shutdowns and repairs.
Choosing the right supplier matters as much as choosing the right grade. Conquest Steel & Alloys has served steel buyers from Mumbai since 2008, backed by 30 years of promoter and partner experience in steel sourcing, stocking and supply chain. We stock plates at our Kalamboli and Taloja yards, cut to size on request, run ultrasonic testing in-house and arrange documentation for quality records.
Before you order, send us your drawing or cutting list, the required thickness, width and length, the quantity, and your delivery location. State whether you need the mill test certificate with the dispatch. We will confirm availability and share an indicative price, then convert it into a formal quote once the details are final.
Ready to move? Request a quote today. Call our Mumbai sales team on +91 22 23894572 (Monday to Saturday, 10 am to 6 pm) or email csa@csteel.in with your requirement. Our team will respond with stock status, lead time and pricing for ASTM A588 Gr.A Corten steel plates Whether you need one plate or a full project lot, we are ready to help.
| India Price : | Min- 68 INR Per Kg / Max- 90 INR Per Kg |
|---|---|
| USD Price : | Min- 0.78 USD Per Kg / Max- 1.03 USD Per Kg |
| Grade : | A (Grade A) |
| Standard : | ASTM A588 / ASME SA588 |
| Material : | Copper, Chromium, Nickel alloy |
| Thickness : | 1.6 mm to 100 mm |
| Width : | Up to 3000 mm |
| Length : | Up to 12000 mm |
| Surface Finish : | Hot rolled, Cold rolled, Weathered |