Corten steel pipe and tube are hollow sections made from weathering steel. Their copper-chromium-nickel alloying helps form a dense rust patina in open air, and the patina slows further corrosion. This is called atmospheric corrosion resistance, and it means the pipe needs no paint in suitable outdoor conditions.
Conquest Steel & Alloys is a Mumbai-based stockist, supplier and exporter of steel plates and industrial steel products, incorporated in 2008. Our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain. We supply Corten steel round pipe, Corten square tube, Corten steel rectangle pipes and flat sections across India from Mumbai.
Our listed size range runs from ½ inch to 16 inch outside diameter. Square hollow sections run from SHS 60 x 60 to SHS 200 x 200, and rectangular sections from RHS 76 x 50 to RHS 200 x 150. Round welded pipe runs from 20 mm to 200 mm diameter. Standard lengths are 5500 mm to 6000 mm, and we also supply cut lengths. Applicable standards include ASTM A847, ASTM A423 Grade 1 and Grade 2 (also ASME SA423). Tubes formed from plate may follow ASTM A588 or IS 11587. Our stockyards at Kalamboli and Taloja cut material to size, and our in-house team performs ultrasonic testing and arranges quality documentation, including mill test certificate support.
Architects and engineers use Corten tube for railings, columns, facade cladding frames, sculpture, signage and landscape features. Lower maintenance supports a lower total cost of ownership. Corten resists atmospheric corrosion, not abrasion. It is mainly a structural and architectural material, not a default choice for pressure or fluid piping. We do not publish fixed rates. Send your grade, shape, size, wall thickness, quantity and delivery location, and we reply with a written quotation.
Definition: Corten steel pipe is a hollow section made from weathering steel containing copper, chromium and nickel. In open air, wet and dry cycles form a dense rust patina that slows further corrosion, so it needs no paint.
Corten steel pipe is also called weathering steel pipe, weather resistant steel pipe and COR-TEN pipe. Designers value it for three reasons:
COR-TEN is a registered trademark. Many buyers use “Corten” generically for weathering steel, and this page does the same.
Corten steel pipe resists corrosion because its alloying elements help a tight, adherent rust layer form on the surface. The layer grows through repeated wet and dry cycles, and it slows the passage of oxygen and moisture to the steel beneath.
The process runs in three stages:
Where Corten pipe works best: Open-air exposure with regular drying, such as railings, columns, facade frames, bridges and landscape work.
Where it struggles: The patina may not form, or may break down, in these conditions:
A hollow-section warning: The outer surface weathers best because rain and sun dry it. The inside of a sealed or poorly drained tube stays damp, so it can corrode faster than the outside. Seal the ends, add drain holes, or specify an internal treatment where water can enter.
Pipe is specified by nominal size and schedule and mainly conveys fluids. Tube is specified by outside diameter and wall thickness and mainly serves structural and mechanical uses. In Corten trade, buyers often use the two words loosely, so always confirm dimensions and the standard.
| Factor | Pipe | Tube |
|---|---|---|
| Sizing method | Nominal size and schedule | Outside diameter and wall thickness |
| Dimensional tolerance | Wider | Tighter |
| Wall thickness | Set by schedule | Specified directly |
| Typical use | Conveying fluids and gases | Structural frames, railings, columns, mechanical parts |
| Common shapes | Round | Round, square, rectangular |
| Corten relevance | Limited, see the pressure note below | Most common for architectural and structural work |
Most Corten buyers need tube-style hollow sections. Corten steel pipe also covers round sections used as columns, posts and railings.
The main standards are ASTM A847, ASTM A423 Grades 1 and 2 (ASME SA423), and plate-based standards such as ASTM A588, ASTM A242, IS 11587 and EN 10025-5. ASTM A847 covers structural tubing with improved atmospheric corrosion resistance.
| Parameter | Typical Range |
|---|---|
| Material | Corten steel / weathering steel |
| Standards | ASTM A423 Gr. 1, ASTM A423 Gr. 2, ASME SA423, ASTM A847 |
| Plate-based standards to confirm | ASTM A242, ASTM A588, IS 11587, EN 10025-5 |
| Shapes | Round, square, rectangle, hydraulic, honed |
| Size range | ½ inch OD to 16 inch OD |
| Square hollow section | SHS 60 x 60 to SHS 200 x 200 |
| Rectangular hollow section | RHS 76 x 50 to RHS 200 x 150 |
| Round welded pipe | 20 mm to 200 mm diameter |
| Wall thickness | - |
| Length | Single random, double random and cut length. Hollow sections 5500 mm to 6000 mm |
| Process | Seamless and welded |
| Supply condition | - |
Note: Always confirm the grade, standard and heat on the mill test certificate before you order.
Corten pipe gets its patina-forming ability from controlled additions of copper, chromium, nickel and phosphorus. The two tables below show ASTM A423 limits and ASTM A847 heat and product limits as supplied to us.
| Element | Grade 1 (%) | Grade 2 (%) |
|---|---|---|
| Carbon (C), max | 0.15 | 0.15 |
| Manganese (Mn), max | 0.55 | 0.50–1.00 |
| Phosphorus (P) | 0.06–0.16 | 0.04 max |
| Sulphur (S), max | 0.060 | 0.05 |
| Silicon (Si), min | 0.10 | – |
| Copper (Cu) | 0.20–0.60 | 0.30–1.00 |
| Chromium (Cr) | 0.24–1.31 | – |
| Nickel (Ni) | 0.20–0.70 | 0.40–1.10 |
| Molybdenum (Mo), min | – | 0.10 |
| Element | Heat Analysis (%) | Product Analysis (%) |
|---|---|---|
| Carbon, max | 0.20 | 0.24 |
| Manganese, max | 1.35 | 1.40 |
| Phosphorus, max | 0.15 | Not applicable |
| Sulphur, max | 0.05 | 0.06 |
| Copper, min | 0.20 | 0.18 |
All values: -. A847 also controls other elements, so read the full chemistry on your mill test certificate.
ASTM A847 Corten tube has a minimum yield strength of 50,000 psi (345 MPa) and a minimum tensile strength of 70,000 psi (483 MPa). The minimum elongation is 19%.
| Grade / Standard | Yield Strength (min) | Tensile Strength (min) | Elongation (min) | Impact Toughness |
|---|---|---|---|---|
| ASTM A847 | 50,000 psi (345 MPa) | 70,000 psi (483 MPa) | 19% | By agreement - |
| ASTM A423 Gr. 1 | - | - | - | - |
| ASTM A423 Gr. 2 | - | - | - | - |
Mechanical values vary by standard, wall thickness and product form. Confirm them on your mill test certificate.
Conquest Steel & Alloys supplies Corten pipe in round, square and rectangular shapes, plus Corten flat. Sizes run from ½ inch to 16 inch outside diameter, and hollow sections follow the ranges below.
| Product | Range | Length |
|---|---|---|
| Round pipe (all types) | ½ inch OD to 16 inch OD | Single random, double random, cut length |
| Round welded pipe | 20 mm to 200 mm diameter | 5500 mm to 6000 mm |
| Corten square tube (SHS) | 60 x 60 mm to 200 x 200 mm | 5500 mm to 6000 mm |
| Corten steel rectangle pipes (RHS) | 76 x 50 mm to 200 x 150 mm | 5500 mm to 6000 mm |
| Wall thickness | - | – |
Weight helps you plan transport, lifting and cost. Steel weighs about 7.85 g/cm³.
Actual weight varies with tolerances and corner radii.
The main benefits are low maintenance, high strength-to-weight ratio and a lower total cost of ownership. Many engineers compare lifecycle cost, not just price per tonne.
Buyers use Corten pipe and tube where long outdoor life and low maintenance matter more than a painted finish. Typical uses include:
Match the use to the exposure. Corten performs best in open air with regular wet and dry cycles.
Corten is a weather resistant steel, not a wear resistant (abrasion resistant, or AR) steel. It resists atmospheric corrosion, but it does not have the hardness needed to resist sliding wear or impact abrasion.
| Feature | Corten (weathering steel) | Wear resistant steel (AR) |
|---|---|---|
| Main purpose | Resists atmospheric corrosion | Resists abrasion and wear |
| Protection method | Self-forming rust patina | High surface hardness |
| Typical use | Railings, facades, bridges, structures | Chutes, hoppers, liners |
If your application involves abrasion, tell us at the enquiry stage. We will help you choose the right product.
Choose by environment, shape, wall thickness, load, standard and certification. A wrong match can cause early corrosion or unnecessary cost.
Pressure and fluid service: Corten is mainly a structural and architectural steel. Confirm the design code, material approvals and internal corrosion risk before you specify weathering steel for piping that carries fluids or operates under pressure.
Corten pipe and tube weld well when you use weathering-grade filler metal and a qualified procedure. Poor fit-up or wet conditions cause defects and uneven weld colour.
Corten pipe needs little maintenance, but good drainage and regular inspection keep the patina healthy. The goal is to let every surface dry between wet cycles.
Indicative Corten steel pipe prices in India range from about ₹1,10,000 to ₹1,70,000 per tonne (₹110 to ₹170 per kg), and tube from about ₹1,20,000 to ₹1,85,000 per tonne (₹120 to ₹185 per kg). These figures are indicative only. They depend on grade, size, wall thickness, quantity and market rates, and they are not fixed quotes.
| Product Form | Grade | Indicative Price (₹ per tonne) | Indicative Price (₹ per kg) |
|---|---|---|---|
| Corten steel pipe | Grade as required | ₹1,10,000 to ₹1,70,000 | ₹110 to ₹170 |
| Corten steel tube | Grade as required | ₹1,20,000 to ₹1,85,000 | ₹120 to ₹185 |
| Corten steel plate | Corten A (ASTM A242) | ₹95,000 to ₹1,30,000 | ₹95 to ₹130 |
| Corten steel plate | Corten B (ASTM A588) | ₹95,000 to ₹1,35,000 | ₹95 to ₹135 |
| Corten steel coil | Grade as required | ₹85,000 to ₹1,20,000 | ₹85 to ₹120 |
| Corten flat | Grade as required | ₹90,000 to ₹1,30,000 | ₹90 to ₹130 |
Prices are indicative, exclude GST, freight and cutting charges, and change with market rates.
Need a Corten steel pipe price list for your project? Send your requirement, and we reply with a written quote.
Conquest Steel & Alloys is a Mumbai-based stockist, supplier and exporter of weathering steel plates and products, incorporated in 2008. Our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain.
Buyers also search for a Corten steel pipe manufacturer, distributor or dealer. We are a stockist and supplier that sources material from manufacturers and mills following international guidelines for production. We link sourcing, stocking, processing and dispatch so that orders reach you on time.
We cut Corten steel to size, test it by ultrasonic methods and arrange quality documentation. These services come from our own stockyards and our in-house quality team.
We supply Corten steel pipe across India from Mumbai, and we export to buyers overseas.
We supply our Corten steel pipes to various countries, including: Vietnam, Bulgaria, United States, United Kingdom, Argentina, Belgium, Lithuania, Saudi Arabia, Gabon, Portugal, Estonia, Puerto Rico, Iran, Sweden, Bolivia, Pakistan, South Korea, Nepal, Hong Kong, Netherlands, Tunisia, Norway, Trinidad & Tobago, Canada, Mongolia, Finland, Slovakia, France, Angola, Serbia, Belarus, Ukraine, Qatar, Denmark, Peru, Czech Republic, Iraq, Chile, Malaysia, Russia, Oman, Morocco, Libya, New Zealand, Nigeria, Croatia, Italy, Brazil, Ecuador, Ireland, Bhutan, China, Turkey, Jordan, Lebanon, Philippines, Israel, Romania, Sri Lanka, Germany, Ghana, Bahrain, South Africa, Greece, Mexico, Colombia, Bangladesh, Gambia, United Arab Emirates, Algeria, Kazakhstan, Switzerland, Austria, Hungary, Venezuela, India, Poland, Namibia, Singapore, Zimbabwe, Yemen, Japan, Azerbaijan, Kenya, Taiwan, Egypt, Australia, Indonesia, Thailand, Spain, Afghanistan, Costa Rica and Kuwait.
We supply our Corten steel pipe worldwide to cities including: Nashik, Bangkok, Perth, Vadodara, Sharjah, Dallas, Houston, New York, London, Kolkata, Geoje-si, Busan, Manama, Chennai, Jakarta, Brisbane, Dammam, Santiago, Mexico City, Mumbai, Kanpur, Visakhapatnam, Doha, Ulsan, Secunderabad, Aberdeen, Gurgaon, Istanbul, Singapore, Atyrau, Abu Dhabi, Chiyoda, Rajkot, Al Jubail, Muscat, Faridabad, Madrid, Ahmedabad, Pimpri-Chinchwad, Tehran, Dubai, Montreal, Bengaluru, Vung Tau, Indore, Pune, Courbevoie, Thane, Los Angeles, Ludhiana, Jamshedpur, Rio de Janeiro, Edmonton, Navi Mumbai, Calgary, Gimhae-si, Noida, Baroda, Granada, Kuala Lumpur, Chandigarh, Kuwait City, Lahore, Melbourne, Ranchi, Riyadh, Hong Kong, Ahvaz, Cairo, Jeddah, Ernakulam, Thiruvananthapuram, Algiers, Moscow, Nagpur, Al Khobar, Ankara, Howrah, Port-of-Spain, Bhopal, Hyderabad, Petaling Jaya, New Delhi, Surat, Bogota, Karachi, Seoul, Milan, Jaipur, Sydney, La Victoria, Toronto, Caracas, Lagos, Hanoi, Ho Chi Minh City, Colombo and Coimbatore.
Corten steel pipe is a hollow section made from weathering steel containing copper, chromium and nickel. In open air it forms a dense rust patina that slows further corrosion, so it needs no paint. It comes in round, square and rectangular shapes. Conquest Steel & Alloys supplies it from Mumbai.
Pipe is specified by nominal size and schedule and mainly conveys fluids. Tube is specified by outside diameter and wall thickness, with tighter tolerances, and mainly serves structural and mechanical uses. Corten buyers usually need tube-style hollow sections for railings, columns and frames, but trade names often overlap.
Corten serves facade cladding, bridges, railings, columns, sculpture, signage, planters, street furniture, chimneys and fire bowls. Designers choose it where long outdoor life and low maintenance matter more than a painted finish. Corten pipe and tube suit open-air structures with regular wet and dry cycles.
Yes. Conquest Steel & Alloys supplies Corten steel pipe and tube across India from Mumbai, with stockyards at Kalamboli and Taloja. Send your grade, shape, size, wall thickness and quantity, and our team replies with a written quote. Confirm current stock before you order.
Corten steel commonly lasts for decades, and well-detailed structures in suitable open-air environments can serve 50 years or more. Lifespan depends on climate, drainage and salt exposure. Sealed or poorly drained hollow sections can corrode from the inside, so detailing matters as much as grade.
Corten contains copper, chromium and nickel, which help it form a dense, adherent patina. Normal carbon steel forms loose, flaking rust that keeps corroding, so it needs paint or coating. Corten costs more per tonne but cuts repainting and maintenance, which lowers total cost of ownership.
No. Corten does not burn, but it is not fire proof. Like other structural steels, it loses strength at high temperatures, so buildings need fire protection and design to the relevant code. The patina gives no fire resistance. Confirm requirements with your structural engineer.
Indicative Corten steel pipe prices in India range from about ₹110 to ₹170 per kg, and tube from about ₹120 to ₹185 per kg, depending on grade, size, wall thickness, quantity and market rates. These figures exclude GST, freight and cutting, and are not fixed quotes. Request a written quotation.
No. Corten rusts, but the rust is the protection. After repeated wet and dry cycles, the surface forms a tight patina that slows deeper corrosion. Sealed or damp interiors, trapped water, soil burial and heavy salt exposure can defeat the patina, so drain or seal hollow sections.
Common standards include ASTM A847 for structural tubing with improved atmospheric corrosion resistance, and ASTM A423 Grades 1 and 2 (also ASME SA423) for low-alloy tubes. Tubes formed from plate may follow ASTM A242, A588, IS 11587 or EN 10025-5. Always confirm the grade on the mill test certificate.
Yes. Corten pipe welds well with a qualified procedure. Use weathering-grade filler metal, control preheat and heat input for the wall thickness, keep fit-up tight, and avoid welding on wet surfaces. Weld-zone colour may differ at first, so test samples if appearance matters. Confirm details with your fabricator.
Corten pipe mainly serves structural and architectural uses. Do not assume it suits pressure or fluid service. Check the design code, wall thickness, internal corrosion and approved material lists first. Weathering steel relies on drying cycles, which a wet interior prevents. Consult your engineer before you specify it for piping.
No. Corten resists atmospheric corrosion, not abrasion. Wear resistant (abrasion resistant, or AR) steel gets its hardness from composition and heat treatment, which Corten lacks. For slurry lines, chutes or liners, specify AR or lined products. Tell us your application and we will advise.
Corten steel pipe and tube give designers and fabricators a durable, low-maintenance hollow section for outdoor work. The copper-chromium-nickel chemistry builds a protective patina, which cuts repainting and lowers the total cost of ownership over the life of a railing, column, facade frame or bridge.
Choosing the right product matters. ASTM A847 suits structural tubing with improved atmospheric corrosion resistance. ASTM A423 Grades 1 and 2 suit low-alloy tube requirements. Tubes formed from plate may follow ASTM A588 or IS 11587. Always check the mill test certificate against your specification. Remember that Corten resists atmospheric corrosion, not abrasion, and that sealed sections need drainage and detailing.
Conquest Steel & Alloys has supplied steel from Mumbai since 2008, backed by 30 years of promoter and partner experience. Our Kalamboli and Taloja stockyards hold material, cut it to size with oxyfuel and plasma equipment, and prepare it for dispatch. Our in-house team performs ultrasonic testing and arranges quality documentation.
We keep the process transparent:
Ready to buy Corten steel pipe and tube at the best price in India? Request a quote through our enquiry form or call +91 9820857494 or 9619554228 to discuss your project with our team today.
Conquest Steel & Alloys
Head office: Shreepati Castle – D1, No. 10 & 11, 1st Floor, 11th Khetwadi, Mumbai, Maharashtra – 400004, India
Phone: +91 9820857494, 9619554228
Email: amit.jain@csteel.in, csa@csteel.in