Corten Angle

Corten Steel Angle

- Conquest Steel & Alloys Team
Oct 26, 2026

Corten Steel Angle: Grades, Sizes, Weight Chart & Applications - Premium Corten Steel Angles - Manufacturer & Supplier Since 2008 - Conquest Steel & Alloys

Corten angle is an L-shaped structural section made from weathering steel. Its copper-chromium-nickel alloying helps form a dense rust patina in open air, and the patina slows further corrosion. This is called atmospheric corrosion resistance. It means a Corten steel angle needs no paint in suitable outdoor conditions.

Conquest Steel & Alloys is a Mumbai-based stockist, supplier and exporter of steel plates and industrial steel products, incorporated in 2008. Our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain. We supply Corten steel equal angles, unequal angles, L angles and T angles across India from Mumbai. Our listed range covers hot-rolled structural angles from 3/4 inch to 8 inch leg sizes. Thickness runs from 1/8 inch to 1 1/8 inch. Standards include ASTM A588 (also ASME SA588) and ASTM A709 Grade 50W. Our stockyards at Kalamboli and Taloja handle cutting to size, and our in-house team performs ultrasonic testing and arranges quality documentation, including mill test certificate support.

Architects and engineers use Corten angles for edging, frames, brackets, supports, bridges, towers, facade cladding support frames, retaining structures and landscape borders. Lower maintenance supports a lower total cost of ownership. Corten resists atmospheric corrosion, not abrasion. It works best in open air with regular drying cycles. For continuous immersion or heavy salt exposure, you may need stainless or duplex steel instead.

This guide covers grades, chemical composition, mechanical properties, size and weight charts, welding, maintenance and indicative pricing. We do not publish fixed rates, because steel prices move with the market. Send us your grade, leg size, thickness, quantity and delivery location, and our team replies with a written quotation.

 

What Is Corten Steel Angle?

Definition: Corten angle is an L-shaped structural section made from weathering steel containing copper, chromium and nickel. Wet and dry cycles form a dense rust patina that slows further corrosion, so the steel needs no paint.


Corten angle is also called weathering steel angle, Corten angle bar and COR-TEN angle. Three features make it popular:

  • Self-protection: The patina removes the need for paint in suitable environments.
  • Strength: It is a high tensile strength, high-strength low-alloy (HSLA) steel, so designers can specify lighter sections.
  • Appearance: The surface shifts from bright orange-brown to deep burgundy-brown over time, which gives structures a distinctive rustic look.

COR-TEN is a registered trademark. Many buyers use “Corten” generically for weathering steel, and this page does the same.

 

How Does Corten Angle Resist Corrosion?

Corten angle resists corrosion because its alloying elements help a tight, adherent rust layer form on the surface. The layer grows through repeated wet and dry cycles, and it slows the passage of oxygen and moisture to the steel beneath.

The process runs in three stages:

  1. Initial rusting: Fresh angle shows bright orange rust within weeks of outdoor exposure.
  2. Patina formation: Over months to a few years, the rust darkens and stabilises.
  3. Protection: The dense layer slows further attack, so the corrosion rate drops sharply.

Where Corten angle works best: Open-air exposure with regular drying, such as frames, supports, edging, bridges and landscape work.


Where it struggles:
The patina may not form, or may break down, in these conditions:

  • Continuous immersion in water
  • Burial in wet soil
  • Heavy salt or chloride exposure
  • Persistently damp, unventilated spaces

An angle-specific warning: The inside corner of the “L” holds water and debris. Where an angle touches another member, a plate or concrete, moisture can stay trapped in the joint. These spots stay wet and can corrode faster than open surfaces. Orient angles so water drains, keep the toe of the angle upward where possible, and avoid tight, unsealed contact joints.


Corten Steel Angle vs Corten Channel

An angle has two legs forming an L, while a channel has a web and two flanges forming a C. Angles suit bracing, framing and edging. Channels carry bending loads better because the flanges sit farther from the neutral axis.

Factor Corten Angle Corten Channel
Shape L-shaped, two legs C-shaped, web plus two flanges
Bending strength Lower Higher
Typical use Brackets, bracing, frames, edging, supports Beams, purlins, girts, heavier frames
Water behaviour Corner can trap water Web can pond water if the opening faces up
Fabrication Easy to cut, drill and weld Heavier, needs more careful connection design

Use an angle when you need a simple, economical connection or support. Choose a channel when the member must carry significant bending.


Equal Angle vs Unequal Angle

An equal angle has two legs of the same length, and an unequal angle has one longer leg. Equal angles suit general framing and edging. Unequal angles suit connections where one leg needs to span or bear more.

Factor Equal Angle Unequal Angle
Leg lengths Both legs the same (for example 4 x 4 inch) Legs differ (for example 4 x 3 inch)
Typical use Frames, bracing, edging, general fabrication Lintels, brackets, connections with one wide bearing leg
Load behaviour Symmetric about the diagonal axis Stiffer about the long-leg axis
Orientation Either leg can face up Orient the long leg to match the load direction

We also supply Corten T sections and bars. 


Corten Steel Angle Grades and Specifications

The main grades for Corten angle are ASTM A588 (SA588) and ASTM A709 Grade 50W. ASTM A242, IS 11587 and EN 10025-5 grades such as S355J0W and S355J2W serve projects written to those standards.

Parameter Typical Range
Standards ASTM A588 / ASME SA588, ASTM A709 Gr 50W
Other standards to confirm ASTM A242, IS 11587, EN 10025-5 (S355J0W, S355J2W) -
Section type Structural angle: equal, unequal, L, T 
Process Hot-rolled
Leg size 3/4 inch to 8 inch (about 19 mm to 203 mm)
Thickness 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1 and 1 1/8 inch
Length  
Supply condition Hot-rolled 

 

A Note on A572-50 and A709-50

Buyers sometimes ask for “A572-50 Corten angle” or “A709-50 Corten angle”. ASTM A572 Grade 50 and plain A709 Grade 50 are HSLA structural grades without weathering chemistry. They match Corten in strength but do not form the same protective patina. For true weathering performance, specify ASTM A588 or A709 Grade 50W. If your project calls for A572-50, tell us at the enquiry stage and we will confirm the right grade.

Note: Always confirm the grade, standard and heat on the mill test certificate before you order.

 

Corten Angle Chemical Composition

Corten angle gets its patina-forming ability from small additions of copper, chromium and nickel. These additions sit alongside carbon, manganese and silicon in a controlled chemical composition.

Element ASTM A588 Gr A / A709 Gr 50W (%) ASTM A242 Type 1 (%) EN S355J2W (%)
Carbon (C) 0.19 max 0.15 max 0.16 max
Manganese (Mn) 0.80–1.25 1.00 max 0.50–1.50
Silicon (Si) 0.30–0.65 – 0.50 max
Chromium (Cr) 0.40–0.65 – 0.40–0.80
Copper (Cu) 0.25–0.40 0.20 min 0.25–0.55
Nickel (Ni) 0.40 max – 0.65 max
Vanadium (V) 0.02–0.10 – –
Phosphorus (P) 0.04 max 0.15 max 0.030 max
Sulphur (S) 0.05 max 0.05 max 0.030 max

 

Corten Angle Mechanical Properties

Corten angle in ASTM A588 and A709 Grade 50W has a minimum yield strength of 50 ksi (345 MPa) and a minimum tensile strength of 70 ksi (485 MPa). Values depend on shape group and thickness.

Grade

Mechanical Properties & Impact Toughness

ASTM A588 Gr A

Yield Strength: 50 ksi (345 MPa) min;
Tensile Strength: 70 ksi (485 MPa) min;
Elongation: 18% in 200 mm;
Impact Toughness: By agreement

ASTM A709 Gr 50W

Yield Strength: 50 ksi (345 MPa) min;
Tensile Strength: 70 ksi (485 MPa) min;
Elongation: 18% in 200 mm;
Impact Toughness: Zone requirements apply

ASTM A242

Yield Strength: 50 ksi (345 MPa) min,
thickness dependent; Tensile Strength: 70 ksi (480 MPa) min;
Elongation: Not specified;
Impact Toughness: By agreement

EN S355J2W

Yield Strength: 355 MPa up to 16 mm;
Tensile Strength: 470–630 MPa;
Elongation: About 20–22%;
Impact Toughness: 27 J at −20 °C

ASTM A572 Gr 50 (Non-weathering, for comparison)

Yield Strength: 50 ksi (345 MPa) min;
Tensile Strength: 65 ksi (450 MPa) min;
Elongation: Not specified;
Impact Toughness: By agreement

 

Confirm exact values on your mill test certificate.


Corten Angle Size Chart and Dimensions

We list Corten angles from 3/4 inch to 8 inch legs, in thicknesses from 1/8 inch to 1 1/8 inch. Exact availability depends on grade and stock.


Equal Angles (Examples)

Leg Size (inch) Leg Size (mm, approx.) Typical Thickness (inch)
3/4 x 3/4 19 x 19 1/8
1 x 1 25 x 25 1/8, 3/16
2 x 2 51 x 51 3/16, 1/4, 5/16, 3/8
3 x 3 76 x 76 1/4, 5/16, 3/8, 1/2
4 x 4 102 x 102 1/4, 3/8, 1/2, 5/8
6 x 6 152 x 152 3/8, 1/2, 5/8, 3/4
8 x 8 203 x 203 1/2, 3/4, 1, 1 1/8


Unequal Angles (Examples)

Leg Size (inch) Leg Size (mm, approx.) Typical Thickness (inch)
3 x 2 76 x 51 1/4, 5/16, 3/8
4 x 3 102 x 76 1/4, 3/8, 1/2
6 x 4 152 x 102 3/8, 1/2, 5/8
8 x 6 203 x 152 1/2, 3/4, 1

 

Corten Angle Weight Chart

A 4 x 4 x 3/8 inch Corten angle weighs about 9.7 lb per foot, or 14.5 kg per metre. Steel weighs about 7.85 g/cm³, so weight scales with the cross-section area.

Size (inch) Type Weight (lb/ft, approx.) Weight (kg/m, approx.)
3/4 x 3/4 x 1/8 Equal 0.58 0.87
1 x 1 x 1/8 Equal 0.80 1.19
2 x 2 x 1/4 Equal 3.19 4.75
3 x 3 x 1/4 Equal 4.89 7.28
3 x 3 x 3/8 Equal 7.17 10.67
4 x 4 x 3/8 Equal 9.72 14.47
4 x 4 x 1/2 Equal 12.75 18.98
6 x 6 x 1/2 Equal 19.55 29.10
8 x 8 x 3/4 Equal 38.89 57.87
3 x 2 x 1/4 Unequal 4.04 6.01
4 x 3 x 3/8 Unequal 8.45 12.58
6 x 4 x 1/2 Unequal 16.15 24.03
8 x 6 x 3/4 Unequal 33.79 50.29

Quick Weight Formula

Weight (kg/m) = thickness (mm) x (leg A + leg B − thickness) (mm) x 0.00785

Example: A 50 x 50 x 6 mm angle weighs 6 x (50 + 50 − 6) x 0.00785 = about 4.43 kg/m.

The formula ignores root and toe radii, so published tables run slightly higher. Actual weight also varies with rolling tolerances. -

 

Benefits of Corten Steel Angle

The main benefits are low maintenance, high strength, easy fabrication and a lower total cost of ownership. Many engineers compare lifecycle cost, not just price per tonne.

  • Low maintenance: The patina removes the need for painting, which helps where access is difficult or closures are costly.
  • Strength: HSLA chemistry lets designers use lighter sections for the same load.
  • Easy fabrication: Angles cut, drill, bolt and weld with standard shop practice.
  • Total cost of ownership: Savings on coatings, scaffolding and shutdowns can offset a higher purchase price.
  • Aesthetics: The evolving surface gives frames, edging and screens a warm, rustic character.
  • Recyclability: Steel is fully recyclable, which supports sustainability goals.

 

Common Applications of Corten Angle

Buyers use Corten angle where long outdoor life and low maintenance matter more than a painted finish. Typical uses include:

  • Edging and landscape borders
  • Support frames for facade cladding and architectural screens
  • Frames, brackets and bracing
  • Bridges and pedestrian walkways
  • Transmission towers and signage structures
  • Retaining walls and fences
  • Planters, outdoor sculpture and street furniture
  • Support structures in industrial yards and open-air facilities

Match the use to the exposure. Corten performs best in open air with regular wet and dry cycles. In coastal locations, keep the steel clear of direct salt spray and standing salt water, or consider stainless or duplex steel.

 

Corten Steel vs Wear Resistant Steel

Corten is a weather resistant steel, not a wear resistant (abrasion resistant, or AR) steel. It resists atmospheric corrosion, but it does not have the hardness needed to resist sliding wear or impact abrasion.

Feature Corten (weathering steel) Wear resistant steel (AR)
Main purpose Resists atmospheric corrosion Resists abrasion and wear
Protection method Self-forming rust patina High surface hardness
Typical use Frames, edging, facades, bridges Chutes, hoppers, liners

If your application involves abrasion, tell us at the enquiry stage. We will help you choose the right product.

 

Choosing the Right Corten Angle

Choose by environment, leg size, thickness, load, standard and certification. A wrong match can cause early corrosion or unnecessary cost.

  1. Environment: Open air with drying cycles suits Corten. Immersion, buried service or heavy chlorides point to stainless or duplex steel.
  2. Leg size and type: Pick equal angles for general framing and edging. Pick unequal angles where one leg needs to bear or span more.
  3. Thickness: Set thickness from your design loads, and add allowance for weathering only if your engineer requires it.
  4. Load and design: Check yield strength, tensile strength and section properties for your calculation.
  5. Grade: Specify ASTM A588 or A709 Grade 50W for weathering performance. Do not substitute A572-50 where you need a patina.
  6. Standard: Use IS 11587 or EN 10025-5 when your project specification names them.
  7. Certification: Ask for a mill test certificate and compare it with your specification.
  8. Detailing: Plan drainage, orientation and sealed or open joints before you order.

 

Considerations When Welding and Fabricating Corten Angle

Corten angle welds and bolts well when you use weathering-grade consumables and a qualified procedure. Poor joint design traps moisture and causes uneven weathering.

  • Filler metal: Use weathering-grade consumables, such as E8018-W2 types for stick welding, so the weld metal forms a matching patina. Confirm the exact consumable in your welding procedure specification.
  • Preheat and heat input: Control both according to thickness, grade and restraint.
  • Joint design: Avoid crevices and pockets that trap water. Use continuous seal welds or leave gaps wide enough to drain and dry.
  • Weathering-grade fasteners: Use weathering-grade high-strength bolts, such as ASTM F3125 Grade A325 Type 3, so bolts weather like the angle. Avoid mixing with zinc-plated or stainless fasteners in contact with wet steel. [VERIFY with your engineer]
  • Low-hydrogen practice: Keep electrodes and fluxes dry to reduce cracking risk.
  • Conditions: Do not weld in rain, high humidity or on wet surfaces.
  • Weld appearance: Weld metal and angle may weather at slightly different rates at first. Test samples if appearance matters.
  • Cutting: Oxyfuel and plasma cutting suit Corten. Clean cut edges before you weld.

 

Proper Maintenance and Care

Corten angle needs little maintenance, but good drainage and regular inspection keep the patina healthy. The goal is to let every surface dry between wet cycles.

  • Drainage: Detail connections so water runs off and does not pool in the inside corner.
  • Trapped moisture: Avoid contact with wet soil, vegetation, concrete that stays damp and tight joints between members.
  • Debris: Clear leaves, dirt and organic matter that collect in the “L” and hold moisture against the steel.
  • Salt and chemicals: Avoid de-icing salts and corrosive substances near the angle.
  • Rust run-off: Plan how to protect adjacent concrete, paving and glass from staining.
  • Inspection: Check the patina periodically. Even dark brown colour is a good sign. Persistent flaking or layered scale signals a problem, especially in corners and joints.
  • Repairs: Do not paint over a developing patina without advice. Ask your engineer or our team before you treat damaged areas.

 

Corten Steel Angle Price

Indicative Corten steel angle prices in India range from about ₹95,000 to ₹1,35,000 per tonne (₹95 to ₹135 per kg). These figures are indicative only. They depend on grade, leg size, thickness, quantity and market rates, and they are not fixed quotes.

Product Form

Grade & Indicative Price Details

Corten Steel Angle (Equal and Unequal)

Grade: ASTM A588 / A709 Gr 50W; Price: ₹95,000–₹1,35,000 per tonne (₹95–₹135 per kg) [CONFIRM]

Corten Steel Plate

Grade: Corten A (ASTM A242); Price: ₹95,000–₹1,30,000 per tonne (₹95–₹130 per kg)

Corten Steel Plate

Grade: Corten B (ASTM A588); Price: ₹95,000–₹1,35,000 per tonne (₹95–₹135 per kg)

Corten Steel Coil

Grade: As required; Price: ₹85,000–₹1,20,000 per tonne (₹85–₹120 per kg)

Corten Flat

Grade: As required; Price: ₹90,000–₹1,30,000 per tonne (₹90–₹130 per kg)

Corten Steel Pipe

Grade: As required; Price: ₹1,10,000–₹1,70,000 per tonne (₹110–₹170 per kg)

Corten Steel Tube

Grade: As required; Price: ₹1,20,000–₹1,85,000 per tonne (₹120–₹185 per kg)

 

Prices are indicative, exclude GST, freight and cutting charges, and change with market rates.


What affects your price:

  • Grade and standard: ASTM A588 and A709 Grade 50W cost more than basic structural grades.
  • Leg size and thickness: Large or heavy sections add weight and cost.
  • Quantity: Larger orders improve your rate.
  • Processing: Cutting to size adds cost but cuts your waste.
  • Market conditions: Steel rates move often.

Need a Corten angle price list for your project? Send your requirement, and we reply with a written quote.


Why Choose Conquest Steel & Alloys for Corten Angle?

Conquest Steel & Alloys is a Mumbai-based stockist, supplier and exporter of weathering steel plates and products, incorporated in 2008. Our promoters and partners bring 30 years of experience in steel sourcing, stocking and supply chain.

Buyers also search for a Corten angle manufacturer, dealer or distributor. We are a stockist and supplier that sources material from manufacturers and mills following international guidelines for production. We link sourcing, stocking, processing and dispatch so that orders reach you on time.


Our Stockyards (Kalamboli and Taloja) and Growth Since 2008

  • 2008: We opened our Khetwadi head office in Mumbai (750 sq.ft.). The same year, we set up a 900 sq.m stockyard at Kalamboli with two OET cranes and an oxyfuel cutting facility.
  • 2011: We built a 3,000 sq.m stockyard at Taloja with three OET cranes, each of 20-ton capacity. It offers plasma and oxyfuel cutting, and a team of eight handles stock management, dispatch, cutting and planning.
  • 2015: We opened a 10,000 sq.m warehouse at Taloja, half closed and half open. It raised our stock capacity ten times compared with 2008. A team of 14 manages stock, packing, dispatch and cutting plans.
  • 2024: We operate our Khetwadi head office from a 1,500 sq.ft. location with 15 team members across administration, marketing, purchase and sales.


Cutting to Size, Ultrasonic Testing and Mill Test Certificate Support

We cut Corten steel to size, test it by ultrasonic methods and arrange quality documentation. These services come from our own stockyards and our in-house quality team.

  • Cutting to size: Oxyfuel cutting at Kalamboli. Plasma and oxyfuel cutting at Taloja. Cutting availability depends on the product and section. Our teams prepare cutting plans to reduce waste.
  • Ultrasonic testing: Our in-house quality team performs ultrasonic testing. We do not carry out destructive testing in-house.
  • Quality documentation: We arrange quality records, including mill test certificate support.
  • Packing and dispatch: Our stockyard teams pack orders securely and dispatch them, using OET cranes for safe loading.


Supply Across India and Beyond

We supply Corten steel angle across India from Mumbai, and we export to buyers overseas.

We supply our Corten angle to various countries, including: Jordan, Pakistan, Costa Rica, Algeria, India, Hungary, Indonesia, Serbia, Slovakia, Libya, Nigeria, Malaysia, Estonia, Romania, Kuwait, Peru, Yemen, Egypt, Greece, Iran, China, Morocco, Zimbabwe, Japan, Mexico, United States, Norway, Australia, Lebanon, Gabon, Gambia, Sweden, South Africa, France, Chile, Poland, Bahrain, Canada, Kenya, Venezuela, Angola, Russia, Taiwan, Trinidad & Tobago, Germany, Tunisia, Ireland, Spain, Mongolia, Turkey, Nepal, South Korea, Hong Kong, Bangladesh, Namibia, Lithuania, Bolivia, Bulgaria, Belarus, Czech Republic, Finland, Iraq, New Zealand, Colombia, Saudi Arabia, Brazil, Ecuador, Oman, Philippines, Thailand, Ukraine, Sri Lanka, Vietnam, Austria, United Arab Emirates, Afghanistan, Singapore, Netherlands, Argentina, Azerbaijan, Kazakhstan, Bhutan, Puerto Rico, Qatar, United Kingdom, Belgium, Italy, Croatia, Portugal, Switzerland, Denmark, Israel and Ghana.

We supply our Corten angle worldwide to cities including: Dallas, Ahvaz, Lahore, La Victoria, Abu Dhabi, Courbevoie, Hyderabad, Perth, Ulsan, Chiyoda, Pimpri-Chinchwad, Thiruvananthapuram, Mexico City, Faridabad, Tehran, Karachi, Colombo, Melbourne, Granada, Seoul, Chandigarh, Caracas, Ahmedabad, Edmonton, Houston, Dubai, Gurgaon, Montreal, Manama, Muscat, Jeddah, Lagos, Al Khobar, Ho Chi Minh City, Nagpur, Santiago, Geoje-si, Ankara, Sydney, Indore, Petaling Jaya, Surat, Atyrau, Sharjah, Navi Mumbai, Doha, Ernakulam, Secunderabad, Bogota, Coimbatore, New Delhi, Rajkot, Algiers, Chennai, Jaipur, Bengaluru, Calgary, Gimhae-si, Cairo, Rio de Janeiro, Toronto, Hanoi, Mumbai, Kolkata, Istanbul, Howrah, Ranchi, Brisbane, Jamshedpur, Pune, Nashik, London, Aberdeen, Visakhapatnam, Kanpur, Riyadh, Moscow, Kuwait City, Thane, Singapore, New York, Noida, Baroda, Vung Tau, Ludhiana, Busan, Jakarta, Port-of-Spain, Milan, Dammam, Kuala Lumpur, Bhopal, Al Jubail, Los Angeles, Madrid, Vadodara, Bangkok and Hong Kong.

Frequently Asked Questions About Corten Steel Angle

What is Corten steel angle?

Corten steel angle is an L-shaped structural section made from weathering steel containing copper, chromium and nickel. In open air it forms a dense rust patina that slows further corrosion, so it needs no paint. It comes in equal and unequal leg sizes. Conquest Steel & Alloys supplies it from Mumbai.

What is the difference between equal and unequal Corten angles?

An equal angle has two legs of the same length, such as 4 x 4 inch, and suits general framing and edging. An unequal angle has one longer leg, such as 4 x 3 inch, and suits connections where one leg must bear or span more. Orient the long leg to match the load.

What grades are available for Corten angle?

The main weathering grades are ASTM A588 (SA588) and ASTM A709 Grade 50W. Projects may also specify ASTM A242, IS 11587 or EN 10025-5 grades such as S355J2W. A572 Grade 50 matches the strength but has no weathering chemistry. Always confirm the grade on the mill test certificate.

Is Corten angle rust proof?

No. Corten rusts, but the rust is the protection. After repeated wet and dry cycles, the surface forms a tight patina that slows deeper corrosion. Trapped water in the inside corner, damp joints, soil contact and heavy salt exposure can defeat the patina, so detail drainage carefully.

Can you weld or bolt Corten angle?

Yes. Corten angle welds well with weathering-grade filler metal and a qualified procedure that controls preheat and heat input. Bolt it with weathering-grade high-strength bolts so the fasteners weather like the steel. Avoid welding on wet surfaces, and design joints that drain. Confirm details with your fabricator or engineer.

What is the weight of a Corten angle?

Weight depends on leg size and thickness. A 4 x 4 x 3/8 inch angle weighs about 9.7 lb per foot (14.5 kg per metre). In metric, use thickness x (leg A + leg B − thickness) x 0.00785 for kg per metre. Check exact weights against your mill test certificate.

What is the price of Corten angle in India?

Indicative Corten angle prices in India range from about ₹95 to ₹135 per kg (₹95,000 to ₹1,35,000 per tonne), depending on grade, leg size, thickness, quantity and market rates. These figures exclude GST, freight and cutting, and are not fixed quotes. Request a written quotation from our team.

Is Corten angle wear resistant?

No. Corten resists atmospheric corrosion, not abrasion. Wear resistant (abrasion resistant, or AR) steel gets its hardness from composition and heat treatment, which Corten lacks. For chutes, hoppers and liners, specify AR plate. Tell us your application at the enquiry stage, and we will advise on the right product.

Where can I buy Corten steel angle in Mumbai?

You can buy Corten steel angle from Conquest Steel & Alloys, a Mumbai stockist, supplier and exporter operating since 2008, with stockyards at Kalamboli and Taloja. Send your grade, leg size, thickness, quantity and delivery location. We reply with a written quote, and we cut to size and test by ultrasonic methods.


Contact Conquest Steel & Alloys for Corten Steel Angle at the Best Price in India

Corten steel angle gives designers and fabricators a durable, low-maintenance section for outdoor work. The copper-chromium-nickel chemistry builds a protective patina, which cuts repainting and lowers the total cost of ownership over the life of a frame, support, edging or bridge detail.

Choosing the right grade matters. ASTM A588 and A709 Grade 50W deliver weathering performance with 50 ksi yield strength. ASTM A242, IS 11587 and EN 10025-5 serve projects written to those standards. A572-50 matches the strength but not the patina. Always check the mill test certificate against your specification. Remember that Corten resists atmospheric corrosion, not abrasion, and that the inside corner of an angle needs drainage and careful detailing.

Conquest Steel & Alloys has supplied steel from Mumbai since 2008, backed by 30 years of promoter and partner experience. Our Kalamboli and Taloja stockyards hold material, cut it to size with oxyfuel and plasma equipment, and prepare it for dispatch. Our in-house team performs ultrasonic testing and arranges quality documentation.

We keep the process transparent:

  1. Share your requirement: Grade, standard, leg size, thickness, length, quantity and delivery location.
  2. Receive your quote: We reply with a written quotation based on current market rates.
  3. Confirm and dispatch: After you approve, we cut, pack and dispatch from our Kalamboli or Taloja stockyard.

Ready to buy Corten steel angle at the best price in India? Request a quote through our enquiry form or call +91 9820857494 or 9619554228 to discuss your project with our team today.


Conquest Steel & Alloys

Head office: Shreepati Castle – D1, No. 10 & 11, 1st Floor, 11th Khetwadi, Mumbai, Maharashtra – 400004, India
Phone: +91 9820857494, 9619554228
Email: amit.jain@csteel.in, csa@csteel.in

whatsapp-icon email-icon call-icon