Machinery handling rock, ore, coal, or scrap wears out fast, and every hour of downtime costs money. Conquest Steel & Alloys manufactures, supplies, and exports ISO 9001-certified Abrasion Resistant (AR) Steel Plates — AR400 to AR700, plus equivalents like Weldox and Dillidur — engineered from carbon-manganese-chromium alloy steel and hardened to HRC 57–62 for significantly longer service life than mild steel. Available in thicknesses from 3 mm to 100 mm with custom cutting on request, these plates line dump bodies, excavator buckets, crusher liners, chutes, and conveyor liners across mining, cement, construction, and recycling industries. Every plate is hardness, ultrasonic, and PMI-tested before dispatch, and supplied across India and 80+ countries under DIN, GB, JIS, and EN standards. For businesses looking to cut downtime and long-term maintenance costs, Conquest offers a reliable source of tested, certified AR plates — from single orders to bulk project supply.
Abrasion Resistant Steel Plates are high-hardness steel plates engineered to resist surface wear caused by friction, impact, and sliding contact with rock, ore, sand, or scrap. They are alloyed with carbon, manganese, and chromium, then quenched and tempered to reach hardness levels of HRC 57–62 (roughly 360–650 Brinell), so they outlast ordinary mild steel by several times in high-wear equipment.
They're commonly known by their grade names — AR400, AR450, AR500, AR600, and AR700 — with the number referring to the approximate Brinell Hardness Number (BHN) of the plate.
"Abrasion resistant" means the steel is formulated and heat-treated to resist material loss from constant scraping, grinding, or impact contact. In practical terms, an AR plate lining a chute or bucket loses metal thickness far more slowly than a mild steel plate exposed to the same rock or ore, because its microstructure is denser and harder at the surface.
AR plates work by combining a hardened surface with a tough, crack-resistant core. During manufacturing, the steel is heated and rapidly quenched to lock in a fine martensitic structure, then tempered to relieve internal stress. This gives the plate two things at once: a hard outer layer that resists cutting and gouging, and enough internal ductility to absorb impact without shattering — which is why AR plates survive both constant abrasive sliding and sudden impact loads from falling rock or ore.
Ordinary mild steel (like IS 2062 or A36) has a hardness of roughly 120–150 BHN, while AR plates start at 360 BHN and go up to 650 BHN. That difference in hardness directly translates to wear life — a mild steel liner in a crusher chute might need replacement every few months, while an AR400 or AR500 liner in the same application can last several times longer, cutting both material cost and labour cost for repeated replacement.
Service life depends on the grade, the abrasiveness of the material handled, and the impact levels involved, but as a general pattern: higher grade = longer life in high-wear zones, provided the application also needs the added hardness. AR400 is typically used where moderate abrasion with some impact is expected (dump truck bodies, general liners), while AR500 and AR600 are reserved for severe, high-impact abrasion such as crusher liners and hard-rock mining chutes, where they significantly outlast lower grades.
Without AR plates, equipment exposed to abrasive material wears down quickly — chutes develop holes, bucket edges thin out and lose cutting efficiency, and conveyor liners require frequent replacement. This means more unplanned downtime, higher maintenance labour costs, and repeated capital spend on parts that should have lasted years. Lining wear-prone components with AR steel converts a recurring maintenance cost into a much longer-term, predictable one.
Conquest Steel & Alloys supplies AR plates across the full hardness range, along with equivalent grades trusted worldwide, including Weldox 420/460/500/700/800, Dillidur 400/500, and Creusabro 4800/8000.
| Grade | Typical Hardness (BHN) | Best Suited For |
|---|---|---|
| AR400 | 360–430 | General liners, dump bodies, moderate abrasion |
| AR450 | 425–475 | Buckets, chutes with moderate impact + abrasion |
| AR500 | 450–540 | Crusher liners, high-abrasion mining equipment |
| AR600 | 550–650 | Severe abrasion, hard-rock and high-impact zones |
| AR700 | 600+ | Extreme wear zones requiring maximum hardness |
| Specification | Details |
|---|---|
| Material Grades | AR400 / AR450 / AR500 / AR600 / AR700, Weldox 420–800, Dillidur 400/500, Creusabro 4800/8000 |
| Thickness | 3 mm to 100 mm |
| Length | 3,000 mm to 12,000 mm |
| Width | 1,000 mm to 3,000 mm |
| Hardness | HRC 57–62 |
| Surface Treatment | Quenched, Tempered, Normalized |
| Standards | DIN, GB, JIS, EN |
| Certification | ISO 9001 |
| Trade Terms | FOB, CIF, EXW |
| Payment Terms | L/C, T/T, Western Union |
All plates undergo hardness, hydrostatic, ultrasonic, macro, micro, and positive material identification (PMI) testing before dispatch.
AR steel plates are used wherever equipment comes into constant contact with rough, heavy, or abrasive material.
Mining — Dump trucks, excavator buckets, chutes, crushers, hoppers
Cement Plants — Cement mixers, silos, feed chutes, wear liners
Construction — Bulldozers, loaders, road construction equipment
Steel Plants — Conveyor systems, material handling equipment, scrap handling
Power Plants — Coal handling systems, ash handling equipment
Agriculture — Ploughs, harrows, cultivator blades
Recycling Industry — Scrap crushers, shredders, recycling bins
Quarry Industry — Stone crushers, vibrating screens, bucket liners
Waste Management — Garbage compactors, waste containers, recycling equipment
| Property | AR Steel Plate | Mild Steel Plate |
|---|---|---|
| Hardness | 360–650 BHN | 120–150 BHN |
| Wear Life | Significantly longer under abrasive load |
Wears down quickly |
| Impact Resistance | High (tough core, hardened surface) |
Moderate, dents and deforms easily |
| Cost Over Time | Lower — fewer replacements | Higher due to frequent replacement |
| Best For | Chutes, liners, buckets, crusher parts |
General fabrication, non-wear structures |
In short: mild steel is cheaper per plate, but AR steel is cheaper per year of service in any application involving abrasive or high-impact material.
Choosing the right grade starts with understanding your application's stress profile, not just picking the hardest available plate.
Conquest Steel & Alloys manufactures, supplies, and exports Abrasion Resistant Steel Plates to clients across mining, cement, construction, steel, and recycling industries in India and more than 80 countries globally. Every batch is produced to national and international standards and tested for hardness, hydrostatic integrity, ultrasonic soundness, and material composition before it reaches a client.
Backed by years of supplying wear-resistant steel to petrochemical, pharmaceutical, oil & gas, pulp & paper, mining, and infrastructure industries, Conquest Steel & Alloys has built a reputation as a dependable Abrasion Resistant Steel Plates manufacturer, supplier, and exporter in India. From single-plate orders to bulk project supply, plates are dispatched with full quality documentation and flexible trade terms (FOB, CIF, EXW).
Wear and tear on heavy equipment isn't avoidable — but how often you replace parts because of it is largely within your control. Abrasion Resistant Steel Plates give mining, cement, construction, and recycling operations a practical way to extend the life of chutes, liners, buckets, and crusher components that would otherwise wear out in a fraction of the time under mild steel. With hardness levels reaching up to HRC 62 and grades ranging from AR400 through AR700, there's a plate suited to almost any level of abrasion or impact your equipment faces.
Conquest Steel & Alloys brings together ISO-certified manufacturing, rigorous multi-stage testing, and a supply network spanning India and more than 80 countries, so businesses can source AR plates with confidence in both quality and consistency. From selecting the right grade for your specific application to delivering plates cut to your exact thickness, length, and width, the process is built around matching the material to the job — not just selling the hardest plate available.
If your equipment is losing metal faster than it should, or you're planning a new build that will face heavy abrasion from day one, now is the time to specify the right AR grade rather than deal with premature failure later.
Ready to reduce downtime and maintenance costs? Get in touch with Conquest Steel & Alloys today to request a quote or discuss bulk order pricing for Abrasion Resistant Steel Plates tailored to your project's exact specifications.
1. What is the difference between AR400 and AR500 steel plates?
AR400 has a hardness of roughly 360–430 BHN and suits moderate abrasion with light impact, while AR500 is harder (450–540 BHN) and built for severe abrasion combined with higher impact loads, such as crusher liners.
2. Can Abrasion Resistant steel plates be welded?
Yes. Most AR grades, including AR400 and AR450, have good weldability using standard fabrication methods. Higher grades like AR500 and AR600 may need controlled preheat and matched consumables to avoid cracking at the weld.
3. What thickness range does Conquest Steel & Alloys supply?
Plates are available from 3 mm to 100 mm thick, in lengths up to 12,000 mm and widths up to 3,000 mm, and can be cut to custom sizes.
4. How much longer do AR plates last compared to mild steel?
Because AR plates are 3–5 times harder than mild steel, they typically deliver significantly longer service life in abrasive applications, though the exact multiplier depends on the material handled and the grade selected.
5. Which industries use Abrasion Resistant Steel Plates the most?
Mining, cement, construction, steel manufacturing, power generation, recycling, and quarrying are the heaviest users, particularly for chutes, liners, buckets, and crusher components.
6. Does Conquest Steel & Alloys export Abrasion Resistant Plates outside India?
Yes. Plates are supplied to clients across more than 80 countries, with standard trade terms including FOB, CIF, and EXW, and payment via L/C, T/T, or Western Union.